OptiX OSN 850 can flexibly access GE or 10GE LAN services, making
it ideal for VIP private lines.
OptiX OSN 850 is easy to install. It can be placed on a desk,
mounted on the wall, or installed in a cabinet. It supports plug and
play (PnP) without commissioning and configuration, and can be
remotely managed and maintained.
Function and Feature |
Description |
|
---|---|---|
Basic functions |
1 x GE <-> 1 x OTU1; 1 x 10GE LAN<-> 1 x OTU2e |
|
Working modes of ports |
|
|
Cross-connection function | Not supported | |
Regeneration mode | Not supported | |
Service specifications | Service types | GE and 10GE LAN |
Service encapsulation mode | 10GE LAN services are encapsulated in bit transparent mapping (11.1G) mode, and GE services are encapsulated in TTT-GMP mode. | |
Tunable wavelength |
Not supported |
|
Protection | Intra-board 1+1 protection | Not supported |
Client 1+1 protection | Not supported | |
ODUk SNCP | Not supported | |
Over-temperature protection: If the temperature of the equipment exceeds the upper threshold and services are affected, the equipment will automatically reset the key chips to prevent the equipment damage. | ||
LPT | Supported | |
ALS |
Supported |
|
Physical clocks |
Not supported |
|
Maintenance features | Loopbacks |
|
PRBS |
Supported on both the client and WDM sides
NOTE:
If the client-side service type is GE
(TTT-AGMP) or 10GE LAN (bit transparent
mapping), PRBS testing in the upstream
direction of the client side is supported.
When the equipment is interconnected with
the LTX or ELOM board, PRBS testing on the
client-side 10GE LAN (bit transparent
mapping) services on the LTX board is not
supported, or PRBS testing on the GE
(TTT-AGMP) services on the ELOM board is not
supported.
|
|
Test frames |
Not supported |
|
Delay measurement |
Supported |
|
NULL frame |
Supported |
|
Power-off event reporting |
Supported |
|
Alarms and performance events monitoring |
Monitors SM_BIP8 and PM_BIP8 bytes and therefore locating line faults. Monitors the laser bias current, laser operating temperature, and optical power on the WDM side. Monitors RMON performance of GE and 10GE LAN services. Reports the power failure alarm POWER_ABNORMAL. |
|
OTN Overheads |
TNF1WATS2:
TNF1WATS1:
|
|
Outband DCN | Not supported | |
FEC |
Supported on the WDM side.
NOTE:
Boards adopting different error correction encoding modes cannot interoperate with each other. |
|
Protocol or standards compliance |
Protocols or standards (non-performance monitoring) with which transparently transmitted services comply |
IEEE 802.3ae ITU-T G.707 ITU-T G.782 ITU-T G.783 |
Protocols or standards (performance monitoring) for processing services |
ITU-T G.805 ITU-T G.806 ITU-T G.709 ITU-T G.7041 ITU-T G.872 ITU-T G.7710 ITU-T G.798 ITU-T G.874 ITU-T M.3100 ITU-T G.874.1 ITU-T G.875 ITU-T G.808.1 ITU-T G.841 ITU-T G.8201 ITU-T G.694.1 |
The OptiX OSN 850 is a small-sized desktop device. It is mainly used for receiving GE and 10GE LAN services from the client side and transmitting the services to OptiX OSN 1800/1832 X16 sites, or receiving services from OptiX OSN 1800/1832 X16 sites. OptiX OSN 850 devices can be managed using the NMS of OptiX OSN 1800/1832 X16 sites.
The OptiX OSN 850 can be applied to the following scenarios:
The logical boards of the OptiX OSN 850 are TNF1WATS1 (for GE
service access on the client side) and TNF1WATS2 (for 10GE service
access on the client side). The hardware version of the boards is
TNF1.
Item |
Description |
---|---|
Hardware version |
TNF1: applicable to OptiX OSN 1800/1832 V100R006C00 and later versions |
NMS version |
iManager U2000 V200R015C50 and later versions |
The differences of different board types lie in WDM-side optical modules. The table below describes the board types of the OptiX OSN 850.
Logical Board Name |
Board Type |
Board Description |
---|---|---|
TNF1WATS2 |
010N1T01AA04 |
OptiX OSN 850-010N1T01AA04-Single Port 10Gbit/s Wavelength Conversion Unit(110/220VAC-1*DWDM-Metro-11.3G-40km-BiDi SFP+) |
010N1T01AA03 |
OptiX OSN 850-010N1T01AA03-Single Port 10Gbit/s Wavelength Conversion Unit(110/220VAC-1*DWDM-Metro-11.3G-40km-BiDi SFP+) |
|
010N1T01AA02 |
OptiX OSN 850-010N1T01AA02-Single Port 10Gbit/s Wavelength Conversion Unit(110/220VAC-1*DWDM-Metro-11.3G-10km-BiDi SFP+) |
|
010N1T01AA01 |
OptiX OSN 850-010N1T01AA01-Single Port 10Gbit/s Wavelength Conversion Unit(110/220VAC-1*DWDM-Metro-11.3G-10km-BiDi SFP+) |
|
TNF1WATS1 |
002N1T01AA04 |
OptiX OSN 850-002N1T01AA04-Single Port 1.25Gbit/s Wavelength Conversion Unit(110/220VAC-1*DWDM-Metro-2.67G-40km-BiDi SFP) |
002N1T01AA03 |
OptiX OSN 850-002N1T01AA03-Single Port 1.25Gbit/s Wavelength Conversion Unit(110/220VAC-1*DWDM-Metro-2.67G-40km-BiDi SFP) |
|
002N1T01AA02 |
OptiX OSN 850-002N1T01AA02-Single Port 1.25Gbit/s Wavelength Conversion Unit(110/220VAC-1*DWDM-Metro-2.67G-15km-BiDi SFP) |
|
002N1T01AA01 |
OptiX OSN 850-002N1T01AA01-Single Port 1.25Gbit/s Wavelength Conversion Unit(110/220VAC-1*DWDM-Metro-2.67G-15km-BiDi SFP) |