* Online Price may be wrong or outdated and can NOT be used as proof by anyone or any organization for any purpose.
1. Next-generation energy-saving intelligent 100M access ethernet switches
2. Auto Configure
3. Embedded 6 KV surge protection
Specifications | S2700-SI/S2710-SI | S2700-EI | S2750-EI/S2720-EI | ||
Switching Capacity | 32 Gbit/s | 32 Gbit/s | S2750-EI: 64 Gbit/s S2720-28TP-EI-AC: 12.8 Gbit/s | ||
Forwarding Performance | 2.7 Mpps/5.4 Mpps/6.6 Mpps/13.2 Mpps | 2.7 Mpps/5.4 Mpps/6.6 Mpps/13.2 Mpps | 8.4 Mpps/9.6 Mpps | ||
Port Descriptions | Downlink: 8/16/24/48 x 10/100 Base-TX Ethernet ports Uplink: 2/4 x GE ports | Downlink: 8/16/24/48 x 10/100 Base-TX Ethernet ports Uplink: 2/4 x GE ports | Downlink: 24 x 10/100 Base-TX Ethernet ports Uplink: 4 x GE ports | ||
MAC Address Table | 8K MAC address entries Manual deletion of dynamic MAC address entries Configurable aging time of MAC addresses Blackhole MAC address entries | 8K MAC address entries Manual deletion of dynamic MAC address entries Configurable aging time of MAC addresses MAC address learning control based on ports Blackhole MAC address entries | 16K MAC address entries Manual deletion of dynamic MAC address entries Configurable aging time of MAC addresses MAC address learning control based on ports Limit on the number of MAC addresses learned on a port Blackhole MAC address entries | ||
VLAN | 4K active VLANs, complying with IEEE 802.1Q Port-based VLAN assignment | 4K active VLANs, complying with IEEE 802.1Q Port-based VLAN assignment MAC address-based assignment Port-based QinQ | 4K active VLANs, complying with IEEE 802.1Q Port-based VLAN assignment MAC address-based assignment Port-based QinQ | ||
QoS | Outbound port-based rate limiting 4 or 8 queues of different priorities on each port Mapping between 802.1p priorities and queues SP, WRR, and SP + WRR algorithms | Port-based rate limiting 4 or 8 queues of different priorities on each port Mapping between 802.1p priorities and queues SP, WRR, and SP + WRR algorithms | Port-based rate limiting 8 queues of different priorities on each port Mapping between 802.1p priorities and queues SP, WRR, and SP + WRR algorithms Packet-based priority re-marking and packet redirection | ||
IPv4 routing | Static routing RIP v1/v2 (S2750-EI) | ||||
IPv6 Features | IPv6 protocol Static IPv6 routes | IPv6 protocol Static IPv6 routes MLD v1/v2 snooping | IPv6 protocol Static IPv6 routes MLD v1/v2 snooping | ||
Multicast | IGMP v1/v2/v3 snooping Port-based rate limiting for multicast packets | MVLAN Controllable multicast IGMP v1/v2/v3 snooping Port-based rate limiting for multicast packets | MVLAN Controllable multicast IGMP v1/v2/v3 snooping Port-based rate limiting for multicast packets | ||
Reliability | S2700-SI: STP (IEEE 802.1d), RSTP (IEEE 802.1w) S2710-SI: STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s) | STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), and RRPP ring topology and RRPP multi-instance | STP (IEEE 802.1d), RSTP (IEEE 802.1w), MSTP (IEEE 802.1s), and RRPP topology and RRPP multi-instance SEP and ERPS (G.8032) Smart Link tree topology and Smart Link multi-instance, implementing millisecond-level protective switch-over | ||
Surge Protection | Surge protection capability of service ports: 7 kV | Surge protection capability of service ports: 7 kV | Surge protection capability of service ports: 7 kV | ||
Security and Access Features | S2700-SI: Storm suppression S2710-SI: Storm suppression, IP Source Guard S2700-SI: Multiple authentication methods including AAA, RADIUS, and TACACS+; Port isolation; Suppression of multicast, broadcast, and unknown unicast packets; CPU defense S2710-SI: Multiple authentication methods including AAA, RADIUS, and TACACS+; Port isolation; Suppression of multicast, broadcast, and unknown unicast packets; CPU defense; | 802.1x authentication and limit on the number of users on an interface Storm suppression IP Source Guard Multiple authentication methods including AAA authentication, RADIUS authentication, and TACACS+ authentication 802.1x authentication, MAC address authentication, MAC bypass authentication DHCP snooping Port isolation and sticky MAC Packet filtering based on MAC addresses Limit on the number of learned MAC addresses Suppression of multicast, broadcast, and unknown unicast packets CPU defense S2750-EI: DHCP relay | 802.1x authentication and limit on the number of users on an interface Storm suppression IP Source Guard Multiple authentication methods including AAA authentication, RADIUS authentication, and TACACS+ authentication 802.1x authentication, MAC address authentication, MAC bypass authentication DHCP snooping Port isolation and sticky MAC Packet filtering based on MAC addresses Limit on the number of learned MAC addresses Suppression of multicast, broadcast, and unknown unicast packets CPU defense S2750-EI/S2720-EI: DHCP relay | ||
Power Consumption | S2700-9TP-SI < 12.8W S2700-18TP-SI < 14.5W S2700-26TP-SI < 15.5W S2710-52P-SI < 38W | S2700-9TP-EI < 12.8W S2700-9TP-PWR-EI < 154W (PoE: 124W) S2700-18TP-EI < 14.5W S2700-26TP-EI < 15.5W S2700-52P-EI < 38W S2700-26TP-PWR-EI < 808W (PoE: 740W) | S2750-20TP-PWR-EI < 435W S2750-28TP-EI < 15.7W S2750-28TP-PWR-EI < 445W S2720-28TP-EI-AC < 15.7W | ||
Interoperability | VLAN-based Spanning Tree (VBST) (interoperating with PVST, PVST+, and RPVST) Link-type Negotiation Protocol (LNP) (similar to DTP) VLAN Central Management Protocol (VCMP) (similar to VTP) For detailed interoperability certifications and test reports, click HERE. |
1. This content is applicable only to regions outside mainland China. Huawei reserves the right to interpret this content.