FusionServer RH5885 V3 Rack Server
The Huawei RH5885 V3 is a standard 4U 4-socket rack
server and supports Intel® Xeon® E7-4800 v2
processors. To meet the requirements of
mission-critical applications such as databases,
business intelligence (BI), and virtualization, the
RH5885 V3 provides up to 60 cores and supports
flexible configurations for processors, DIMMs, I/O,
and hard disks, achieving optimal cost
effectiveness.
Product Features
Strong processing capabilities for optimal cost effectiveness
- The RH5885 V3 supports four Intel® Xeon® E7-4800 v2
processors. The maximum number of cores per processor is
increased from 10 to 15, and the maximum cache capacity
increased from 30 MB to 37.5 MB.
- To maximize the concurrent processing capability, up to 60
cores and 120 concurrent threads are supported.
- The overall performance is increased by 100% compared with
the previous-generation Westmere-EX (E7-4800).
- Configured with Huawei ES series PCIe solid-state drives
(SSDs), the RH5885 V3 provides excellent I/O performance,
eliminating disk performance bottlenecks.
Flexible expansion to fit various
application scenarios
- The RH5885 V3 supports eight or twenty-three 2.5" hard
disks, which allows flexible configuration of the local
storage capacity. This applies to distributed databases and
big data analysis.
- The built-in USB port is provided for pre-installing OS or
encryption certificate.
- A plug-in NIC is used to provide LAN on motherboard (LOM).
GE or 10GE ports can be flexibly configured.
Fault-tolerant design to ensure stable
system operation
- Chip-level fault-tolerant features, such as automatic
recovery for processors and links, ensure stable system
operation.
- Memory mirroring and memory sparing prevent system shutdown
caused by memory hardware faults.
- Full redundancy and hot swap maintenance are supported for
key components, such as PSUs, fan modules, and hard disks,
without the need for opening the chassis cover. These features
facilitate quick replacement for faulty components during normal
system operation, ensuring high system reliability.
- The integrated intelligent management (iMana) software
monitors system operation, triggers warnings, and rectifies
faults.
- A diagnosis panel facilitates fault location, which reduces
the time required to rectify faults.
Optimized energy efficiency to reduce
OPEX
-
Power capping is adopted to increase the
server deployment density without the need for changing the
equipment room design.
- The dynamic energy-saving technology adjusts the processor
frequency and voltage according to the processor usage, reducing
energy consumption.
- Platinum PSUs offer power efficiency of up to 94% at 50%
loads.
Product Specification
|
RH5885 V3
|
Form factor
|
4U
rack server
|
Number of processors
|
2 or 4
|
Processor model
|
Intel® Xeon® E7-4800 v2 processors, with an L3 cache
capacity of 37.5 MB maximum
|
Maximum memory capacity
|
48 DDR3 DIMMs, up to 3 TB (64 GB DIMMs)
|
Maximum local
storage
|
8 or 23 x 2.5" SAS/SATA HDDs or SSDs
|
RAID support
|
RAID 0, 1, 10, 5, and 6
RAID cache: up to 1 GB
Power-off protection:
BBU or supercapacitor
|
LOM network port
|
2 or 4 x GE ports, or 2 x 10GE ports
|
Expansion slot
|
A maximum of 7 PCIe slots
|
USB port
|
5 (front: 2; rear: 2; built-in: 1)
|
Fan module
|
5 hot-swappable, counter-rotating fan modules in N+1
redundancy mode
|
PSU
|
2 or 4 hot-swappable, redundant PSUs
|
Management
|
Integrated BMC that supports the following:
IPMI 2.0, SNMPv3, SNMP Trap v1, CIM, and WS-MAN
SOL, KVM over IP, WebUI, CLI, IPMI tool, and virtual media
Black box function
|
Operating systems supported
|
Microsoft Windows Server
Red Hat Enterprise Linux
SUSE Linux Enterprise Server
Oracle Enterprise Linux
Debian
CentOS
Kylin Linux
Oracle Server VM
Citrix XenServer
VMware ESXi
|
Power supply
|
110 V/220 V AC or –48 V DC
|
Operating temperature
|
5ºC – 40ºC
|
Dimensions (W x D x H)
|
Height: 175 mm (6.89 in.)
Width: 447 mm (17.60 in.)
Depth: 790 mm (31.10 in.)
|
For more details, please refer to
Huawei Tecal RH5885 V3 Rack Server Brochure
(PDF).