HyperX HX426C13PB3/8 is a 1G x 64-bit (8GB) DDR4-2666 CL13 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module supports Intel?? Extreme Memory Profiles (Intel??XMP) 2.0. Each module has been tested to run at DDR4-2666 at a low latency timing of 13-15-15 at 1.35V. The SPDs are programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The JEDEC standard electrical and mechanical specifications are as follows:
??? Power Supply: VDD = 1.2V Typical
??? VDDQ = 1.2V Typical
??? VPP - 2.5V Typical
??? VDDSPD = 2.25V to 3.6V
??? On-Die termination (ODT)
??? 16 internal banks; 4 groups of 4 banks each
??? Bi-Directional Differential Data Strobe
??? 8 bit pre-fetch
??? Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
??? Height 1.661??? (42.20mm)
CL(IDD)
17 cycles
Row Cycle Time (tRCmin)
45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
Maximum Operating Power
TBD W
UL Rating
94 V 0
Operating Temperature
0oC to +85oC
Storage Temperature
-55oC to +100oC
Item Dimension (L inchxW inchxH inch)
3 x 7 x 1
Weight
1.00 lb
Warranty Information
Lifetime Manufacture Warranty