HyperX HX426C16FB2K2/16 is a kit of two 1G x 64-bit (8GB) DDR4-2666 CL16 SDRAM (Synchronous DRAM) 1Rx8, memory module, based on eight 1G x 8-bit FBGA components per module. Each module kit supports Intel?? Extreme Memory Profiles (Intel?? XMP) 2.0. Total kit capacity is 16GB. Each module has been tested to run at DDR4-2666 at a low latency timing of 16-18-18 at 1.2V. Additional timing parameters are shown in the Plug-N-Play (PnP) Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:
??? Power Supply: VDD = 1.2V Typical
??? VDDQ = 1.2V Typical
??? VPP - 2.5V Typical
??? VDDSPD = 2.25V to 3.6V
??? On-Die termination (ODT)
??? 16 internal banks; 4 groups of 4 banks each
??? Bi-Directional Differential Data Strobe
??? 8 bit pre-fetch
??? Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
??? Height 1.340??? (34.04mm), w/heatsink
CL(IDD)
16 cycles
Row Cycle Time (tRCmin)
45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
29.25ns(min.)
Maximum Operating Power
TBD W
UL Rating
94 V 0
Operating Temperature
0oC to +85oC
Storage Temperature
-55oC to +100oC
Item Dimension (L inchxW inchxH inch)
3 x 7 x 1
Weight
1.00 lb
Warranty Information
Lifetime Manufacture Warranty