ValueRAM's KVR24E17S8/8MA is a 1G x 72-bit (8GB)
DDR4-2400 CL17 SDRAM (Synchronous DRAM), 1Rx8, ECC,
memory module, based on nine 1G x 8-bit FBGA components.
The SPD is programmed to JEDEC standard latency DDR4-2400
timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold
contact fingers. The electrical and mechanical specifications are
as follows:
FEATURES
??? Power Supply: VDD=1.2V Typical
??? VDDQ = 1.2V Typical
??? VPP - 2.5V Typical
??? VDDSPD=2.2V to 3.6V
??? Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
??? Low-power auto self refresh (LPASR)
??? Data bus inversion (DBI) for data bus
??? On-die VREFDQ generation and calibration
??? Single-rank
??? On-board I2 serial presence-detect (SPD) EEPROM
??? Temperature sensor with integrated SPD
??? 16 internal banks; 4 groups of 4 banks each
??? Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
??? Selectable BC4 or BL8 on-the-fly (OTF)
??? Fly-by topology
??? Terminated control command and address bus
??? PCB: Height 1.23??? (31.25mm)
??? RoHS Compliant and Halogen-Free
CL(IDD)
17 cycles
Row Cycle Time (tRCmin)
46.16ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
UL Rating
94 V - 0
Operating Temperature
0o C to +85o C
Storage Temperature
-55o C to +100o C
Item Dimension (L inchxW inchxH inch)
3 x 7 x 1
Weight
1.00 lb
Warranty Information
Lifetime Manufacture