MPN: EAP1300
                        Category: Networking >> Wireless Networking
                        Vendor: EnGenius
                        Weight: 2 LB(S)
                        Price: US$ 113.95
                    
Standards
IEEE 802.11b/g/n on 2.4 GHz 
IEEE802.11a/n/ac on 5 GHz
Processor
Qualcomm 717 MHz Quad-Core CPU 
4x ARM Cortex A7
Antennas
2 x 5 dBi Omni-Directional Integrated
Physical Interface
10/100/1000 Gigabit Ethernet Port 
DC Jack 
Reset Button 
Kensington Security Slot
LED Indicators
Power 
LAN 
2.4 GHz 
5 GHz
Power Source
Power-over-Ethernet: 802.3af Input 
IEEE 802.11e Compliant Source 
12VDC /1A Power Adapter
Maximum Power Consumption
9W
Surge Protection
0.5KV
Wireless and Radio Specifications
Operating Frequency: Dual-Radio Concurrent 2.4 GHz and 5 GHz 
Operation Modes:   
- Access Point Mode (AP mode) 
- WDS: WDS AP, WDS Bridge 
Frequency Radio: 
- 2.4 GHz: 2400 MHz to 2472 MHz 
- 5 GHz: 5150 MHz to 5250 MHz, 5250 MHz to 5350 MHz, 5470 MHz to 5725 MHz, 5725 MHz to 5850 MHz 
Transmit Power:  
- 2.4 GHz: 23 dBm 
- 5 GHz: 23 dBm 
Radio Chains/Spatial Stream: 2x2:2 
SU-MIMO: Two (2) Spatial Streams SU-MIMO up to 1267 Mbps to a single client 
MU-MIMO: Two (2) Spatial Streams MU-MIMO up to 1267 Mbps to two (2) MU-MIMO capable wireless devices simultaneously 
Supported Data Rates (Mbps): 
- 2.4 GHz: Max 400 
- 5 GHz: Max 867 
- 802.11b: 1, 2, 5.5, 11 
- 802.11a/g: 6, 9, 12, 18, 36, 48, 54 
- 802.11n: 6.5 to 400 Mbps (MCS0 to MCS15) 
- 802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS  1 to 2) 
Supported Radio Technologies: 
- 802.11b: Direct-Sequence Spread Spectrum (DSSS) 
- 802.11a/g/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM) 
- 802.11n/ac: 2x2 MIMO with 2 Streams 
Channelization: 
- 802.11ac Supports Very High Throughput (VHT) - VHT 20/40/80 MHz 
- 802.11n Supports High Throughput (HT) - HT 20/40 MHz 
- 802.11n Supports Very High Throughput (VHT) Under the 2.4 GHz Radio - VHT 40 MHz (256-QAM) 
- 802.11n/ac Packet Aggregation: AMPDU, ASPDU 
Supported Modulation:  
- 802.11b: BPSK, QPSK, CCK 
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 
- 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
Management
Multiple BSSID: Supports 16 SSIDs (8 SSIDs per Band) 
VLAN Tagging:  
- Supports 802.1q SSID-to-VLAN Tagging 
- Cross-Band VLAN Pass-Through 
- Management VLAN 
Spanning Tree: Supports 802.1d Spanning Tree Protocol 
QoS (Quality of Service): 
- Compliant With IEEE 802.11e Standard 
- WMM 
SNMP: v1, v2c, v3 
MIB: I/II, Private MIB
Management Features
Deployment Options: 
- Stand-Alone (Individually Managed) 
- Managed Mode (w/ezMaster and Neutron Switch) 
Stand-Alone Management Features:  
- Auto Channel Selection 
- Auto Transmit Power 
- Wireless STA (Client) Connected List 
- Guest Network 
- Fast Roaming (802.11k and 802.11r) 
- Pre-Authentication (802.11i, 802.11x) 
- PMK Caching (802.11i) 
- RSSI Threshold 
- Band Steering 
- Traffic Shaping 
- VLANs for Access Point - Multiple SSIDs 
- Backup/Restore Settings 
- Auto Reboot 
- E-Mail Alert 
- Site Survey 
- Save Configuration as Default 
Control Features: 
- Managed Mode (w/ezMaster/Neutron Switch) 
- Distance Control (ACK Timeout) 
- Multicast Supported 
- Wi-Fi Scheduler 
- Client Traffic Status 
- RADIUS Accounting (802.1x) 
- Power Save Mode (U-APSD Support) 
- CLI Support 
- HTTPS 
Wireless Security: 
- WEP Encryption 64/128/152 bit 
- WPA/WPA2 Enterprise (WPA-EAP using TKIP or AES) 
- Hide SSID in Beacons 
- MAC Address Filtering, Up to 32 MACs per SSID 
- Wireless STA (Client) Connected List 
- SSH Tunnel 
- Client Isolation
Wireless Management Features (w/ezMaster and Neutron Switch) (Available in AP Mode) 
- AP Auto Discovery and Provisioning 
- AP Auto IP Assignment 
- AP Group Management 
- Auto AP Rebooting 
- AP Device Name Editing 
- AP Radio Settings 
- Band Steering 
- Traffic Shaping 
- Fast Roaming (802.11k and 802.11r) 
- Pre-Authentication (802.11i, 802.11x) 
- PMK Caching (802.11i) 
- RSSI Threshold 
- AP Client Limiting 
- Client Fingerprinting 
- AP VLAN Management 
- VLANs for AP - Multiple SSIDs 
- Secured Guest Network 
- Access Point Status Monitoring 
- Wireless Client Monitoring 
- Email Alert 
- Wireless Traffic and Usage Statistics 
- Real-Time Throughput Monitoring 
- Visual Topology View 
- Floor Plan View 
- Map View 
- Wireless Coverage Display 
- Secure Control Messaging (SSL Certificate) 
- Local MAC Address Database 
- Remote MAC Address Database (RADIUS) 
- Unified Configuration Import/Export 
- Bulk Firmware Upgrade Capability 
- One-Click Update 
- Intelligent Diagnostics 
- Kick/Ban Clients 
- Wi-Fi Scheduler
Temperature Range
Operating: 32o F to 104oF (0o C to 40oC) 
Storage: -22oF to 176oF (-30oC to 80oC)
Humidity (non-condensing) 
Operating: 90% or less 
Storage: 90% or less
Package Contents
EAP1300 Indoor Access Point 
Power Adapter (12V/1A) 
T-Rail Mounting Kits 
Ceiling and Wall Mount Screw Sets 
Mounting Brackets 
RJ-45 Ethernet Cable 
Quick Installation Guide
Certifications
FCC, CE
Item Dimension (L inchxW inchxH inch)
12 x 9 x 3
Weight
2.00 lb
Warranty Information
 1 Year