Access Point Type
Indoor, dual radios concurrent, 5GHz 802.11 ac 2x2 MIMO is back-wards compatible with 802.11 a/n mode, 2.4GHz 802.11 n 2x2 MIMO is backwards compatible with 802.11 b/g.

SU-MIMO
Two(1) spatial stream SU-MIMO for up to 1,267 Mbps wireless data rate to a single wireless client device.

MU-MIMO
Two(1) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to transmit to two(2) MU-MIMO capable wireless client devices simultane-ously.

Frequency Radio
2.4GHz: 2400MHz to 2835MHz,
5GHz: 5150MHz to 5250MHz, 5250MHz to 5350MHz, 5470 to 5725MHz, 5725MHz to 5850MHz
Support radios and channels

Supported Radio Technology
802.11b: Direct-sequence spread-spectrum (DSSS)
802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 4 streams
802.11ac supports very high throughput (VHT) - VHT 20/40/80 MHz
802.11n supports high throughput (HT) - HT 20/40 MHz
802.11n supports very high throughput under the 2.4GHz radio -VHT40 MHz (256-QAM)
802.11n/ac packet aggregation: A-MPDU, A-SPDU

Supported Modulation Type
802.11b: BPSK, QPSK, CCK
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Transmit Power (Maximum Value)
2.4GHz: 21dBm
5GHz: 21dBm

Tx Beamforming (TxBF)
Increasing signal reliability and transmitting distance. Supported data rates (Mbps)
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6.5 to 300 (MCS0 to MCS15)
802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS1 to 2)

Power
Maximum Power Consumption: 10W
Power Source:
- Direct DC Input: 12V/1A
- Power Over Ethernet: 802.3af Input

Antenna
EAP1300EXT: (External Antenna)
- 2.4GHz: Two detachable 5.0dBi RP-SMA antennas
- 5GHz: Two detachable 5.0dBi RP-SMA antennas

Interfaces
Networking Interface: One (1) 10/100/1000 BASE-T RJ-45 Ethernet Ports
DC Powering Interface: One (1) DC Jack interface
LED Indicators: Display system and wireless transmission status
Reset Button: Convert Access Point to the Factory default or the Users Default

Mounting
Ceiling Mounting: Assemble a mounting bracket for drop ceiling
Wall Mounting: Mount Access Point on a flat wall

Environment
Operating Temperature: 0^oC to 40^oC (32^oF to 104^oF)
Operating Temperature: Humidity: 0% to 90% typical
Storage Temperature: -30^oC to 80^oC (-22^oF to 176^oF)
Storage Temperature: Humidity: 0% to 90% typical

Compliance Regulatory
FCC:
- Subpart15 B
- Subpart C 15.247
- Subpart E 15.407
CE:
- EN 300 328
- EN 301 893
- EN 50385
- EN 60601-1-1
- EN 60601-1-2
- EN 55032
- EN 55024
R and TTE Directive 1995/5/EC
Low Voltage Directive 72/23/EEC

Item Dimension (L inchxW inchxH inch)
12 x 9 x 3

Weight
2.00 lb

Warranty Information
1 Year