Focus on Americas Market
View Quotation Cart ( 0 )
7716-32X-O-AC-F-US | ActForNet

MPN: 7716-32X-O-AC-F-US
Category: Networking >> Switches
Vendor: Edgecore Networks
Weight: 23 LB(S)
Price: US$ 12556.25

-
+
The Edgecore AS7716-32X switch are Top-of-Rack (TOR) or spine switches for high-performance data centers. In a compact 1RU form factor, the switches provide line-rate L2 and L3 switching across the 32 x QSFP28 ports, supporting up to 32 x 40/100 GbE, 64 x 50 GbE, or 128 x 10/25 GbE connections.
The AS7716-32X can be deployed as a TOR switch supporting 10/25/50 GbE to servers with 40/50/100 GbE uplinks, or as a spine switch supporting 40/50/100 GbE spine interconnects. These open network switches are loaded with the Open Network Install Environment (ONIE) which supports the installation of compatible Network Operating System software, including the open source options Open Network Linux and OpenSwitch, plus commercial NOS offerings.

???  Cost-effective, bare-metal switch infrastructure for data center fabric.

???  Deploy as Top-of-Rack switch supporting 10 or 25 GbE to servers, with 40 or 50 or 100 GbE uplinks.

???  Deploy as spine switch supporting 40, 50, or 100 GbE ToR and spine interconnects.

???  32 x QSFP28 switch ports, each supporting 1 x 100 GbE or 1 x 40 GBE, or via breakout cables, 2 x 50 GbE or 4 x 25 GbE or 4 x 10 GbE.

???  Layer 2 or Layer 3 forwarding of 3.2 Tbps (full duplex).

???  Supports hot/cold aisle with port-to-power and power-to-port airflow SKUs.

???  All ports on front; PSUs and fans accessible from rear.

???  Hot-swappable, load-sharing, redundant AC or -48V DC or 12V DC PSUs.

???  5+1 redundant, hot-swappable fan modules.

???  Energy Efficiency: 310 W typical power consumption without pluggable optics.

???  Bare-Metal hardware switch pre-loaded with diagnostics software and with Open Network Install Environment (ONIE) for automated loading of compatible open source and commerical NOS offerings.

Switch Ports
32 x QSFP28 ports. Each Port supports 1x40/100 GbE or 2 x 50 GbE or 4 x 10/25 GbE per port using splitter cables.

Management ports on port side
1 x RJ-45 serial console
1 x RJ-45 100/1000BASE-T management
1 x USB Type A storage

Switch Silicon
Broadcom BCM56960 Tomahawk 3.2 Tbps.
No PHYs, No Retimers

CPU Modules
Intel Xeon D-1518 quad-core 2.4 GHz
16 GB SO-DIMM DDR4 RAM
16 MB SPI Flash
8GB NAND Flash
32 GB M.2 SSD MLC

Switching Capacity
3.2 Tbps

Forwarding Rate
4.7 Bpps
Jumbo frames support up to 9216 Bytes

Packet Buffer Size
16 MB integrated packet buffer

Subject to NOS
MAC Addresses: 8 K min./136 K max.

IPv4
8 K min./72 K max. host entries, 16 K LPM entries with TCAM-only mode

IPv6
4K /36 K max. host entries, IPv6/64 8 K TCAM-only mode

Operating Temperature
0oC to 45oC (32oF to 113oF)

Storage Temperature
-40oC to 70oC (-40oF to 158oF)

Operating Humidity
5% to 95% non-condensing

Operating Altitude
0 to 10,000 feet

Software
Switch is loaded with Open Network Install Environment (ONIE) software installer
Compatible with the following NOS options:
Open Network Linux, the open-source, OCP reference NOS

LEDs
QSFP 28 Port LEDs: Link Status, Activity, Rate
Ethernet Management Port LED: Link Status, Activity
Console Port LED: Link Status
System LEDs: Diagnostic, Locator, PSU and Fan Status

PSUs
2 redundant, load-sharing, hot-swappable AC or -48 VDC

Input Voltage
90 to 240 VAC at 50-60 Hz. -36 to -72 VDC.

PSU Efficiency
Up to 93% for AC PSUs

Power input option
12 VDC