Dimensions
2U

Motherboard
MG50-G20

CPU
Intel Xeon E5-2600 V3 processors
Intel Xeon E5-2600 V4 processors
NOTE: If only 1 CPU is installed, some PCIe, memory, I/O functions might be unavailable.

Socket
2 x LGA 2011-3
Mounting pitch: narrow ILM (56x94mm)
Max. length of M4 screw threads: 3.7mm
Screws longer than 3.7mm might damage the motherboard

Chipset
Intel C612

Memory
24 x DIMM slots
DDR4 memory supported only
Quad channel memory architecture
RDIMM modules up to 32GB supported
LRDIMM modules up to 64GB supported
3DS LRDIMM modules up to 128GB supported
1.2V modules: 1600/1866/2133/2400 MHz

LAN
2 x 10GbE SFP+ ports (Intel 82599ES)
1 x 10/100/1000 management LAN

Video
Integrated in Aspeed AST2400
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp

Storage
2 x 2.5" hot-swappable NVMe bays
6 x 2.5" hot-swappable HDD/SSD bays

SATA
10 x SATA III 6Gb/s ports

SAS
GC-MSLZ1 expansion card in option: 2 x Mini-SAS (for 8 x SAS 6Gb/s ports)
LSI SAS2208 controller
Hardware RAID 0/1/5/6/10/50/60
Hardware RAID 5/6 XOR Engine (single pass)
Low profile PCIe 2.0 x8 mezzanine connector
76.8 x 98 mm

RAID
Intel SATA RAID 0/1/5/10

Peripheral Drives
-

Expansion Slots
8 x PCIe x16 (Gen3 x16 bus)
GIGABYTE carries out comprehensive validation to ensure support for Intel Xeon Phi, Nvidia and AMD adapters.
Note: each system is validated for population with a uniform GPU model. Support is not provided for mixed GPU populations.
For the latest QVL, please contact your GIGABYTE representative.
1 x PCIe x16 (Gen3 x8 bus) Half-length low-profile slot
1 x Proprietary PCIe x8 (Gen3 x8 bus) mezzanine connector (Occupied by CNV6012 NVMe HBA)

Internal I/O
1 x 18-pin power connector
1 x 14-pin power connector
2 x 8-pin power connectors
2 x 4-pin power connectors
10 x SATA III 6Gb/s ports
1 x USB 3.0 header
1 x USB 2.0 header
1 x TPM header
1 x HDD back plane board header
1 x 12-pin front panel header
1 x 23-pin front panel header
1 x JTAG header
2 x SATA SGPIO headers
1 x Front VGA header
1 x Serial header
1 x IPMB connector
1 x P12V standby connector
1 x PMBus selection jumper
1 x Clear CMOS jumper
1 x LT debug jumper

Front I/O
1 x Power button with LED
1 x ID button with LED
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
1 x Reset button

Rear I/O
2 x USB 3.0
1 x VGA
1 x Serial
2 x SFP+
1 x RJ45
1 x Power button with LED
1 x ID button with LED
1 x Reset button
1 x NMI button
1 x System status LED

Backplane I/O
8 x SAS/SATA ports

TPM
1 x TPM header

Power Supply
2 x 2000W redundant PSU
80 PLUS Platinum
AC input:
- 1000W: 100-120V/ 12.5-10.5A, 50-60Hz
- 1800W: 200-220V/ 10-9.5A, 50-60Hz
- 1980W: 220-230V/ 10-9.8A, 50-60Hz
- 2000W: 230-240V/ 10-9.8A, 50-60Hz
DC output:
- 11000W at 100-120V
- 1800W at 200-220V
- 1980W at 220-230V
- 2000W at 200-240V