MPN: DS-2CD63C2F-IV
Category: Cameras >> Cameras
Vendor: Hikvision
Weight: 3 LB(S)
Price: US$ 822.34
Image Sensor
1/1.7" Progressive Scan CMOS
Signal System
PAL/NTSC
Min. Illumination
0.01 Lux at (F1.2, AGC ON), 0.04 Lux at (F2.4, AGC ON), 0 Lux with IR
Shutter time
1/25(1/30)s - 1/100,000s
Lens
1.98mm at F2.4, angle of view: 360o
Lens Mount
M12
Day and Night
IR cut filter with auto switch
Wide Dynamic Range
Digital WDR
Digital noise reduction
3D DNR
Video Compression
H.264/MJPEG
Video bit rate
32Kbps-16Mbps
Dual Stream
Yes
Max. Image Resolution
4000 x 3072
Frame Rate
Mode1:
50Hz: 1xfisheye (4000x3072, 20fps 3072x3072,2560x2560 , 25fps) or 4PTZ (1600x1200, 12fps)
60Hz: 1xfisheye (4000x3072, 20fps 3072x3072,2560x2560 , 24fps ) or 4PTZ (16001200, 15fps)
Mode2:
50Hz: 1xFisheye(2048x2048, 1280x1280, 12fps) + 1xFisheye(720x720, 12fps) +3PTZ(1600x1200, 12fps)
60Hz: 1xFisheye(1280x1280, 15fps) + 1xFisheye(720x720, 15fps) +3PTZ(1600x1200, 15fps)
Mode3:
50Hz:1xPanorama(3072x2304, 3072x1152, 12fps) + 1xPanorama(704x576, 12fps)
60Hz:1xPanorama(3072x2304, 3072x1152, 15fps) + 1xPanorama(704x576, 15fps)
Image Settings
Saturation, Brightness, Contrast , Hue, Sharpness, AGC, White Balance
ROI
Up to 4 fixed areas in each stream
3D DNR
Support
Day/Night Switch
Auto/Schedule/Alarm Trigger
Network Storage
NAS (Support NFS,SMB/CIFS)
Alarm Trigger
Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception