Camera
Image Sensor : 1/3" Progressive Scan CMOS
Signal System : PAL/NTSC
Min. Illumination : 0.028Lux at (F2.0,AGC ON), 0 Lux with IR
Shutter time : 1/3 s to 1/100,000 s
Lens : 4mm at F2.0 (2.8mm, 6mm optional)
Angle of view: 92.5^o(2.8mm), 73.1^o(4mm), 46^o(6mm)
Lens Mount : M12
Adjustment Range : Pan: 0to+/-30^o, Tilt: 0to75^o, Rotation: 0-360^o
Day Night : IR cut filter with auto switch
Wide Dynamic Range : Digital WDR
Digital noise reduction : 3D DNR

Compression Standard
Video Compression : H.264/MJPEG
Video bit rate : 32Kbpsto12Mbps

Image
Max. Image Resolution : 1280x960
Frame Rate : 50 Hz: 25 fps (1280 960), 25 fps (1280 x 720), 25 fps (704 x 576),
25 fps (640 x 480)
30 fps (1280 960), 30 fps (1280 x 720), 30 fps (704 x 576),
30 fps (640 x 480)
Image Settings : Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web browser
BLC : Yes, zone configurable
ROI : Support

Network
Network Storage : Micro SD/SDHC/SDXC card with ANR (up to 128G), NAS (Support NFS, SMB/CIFS)
Alarm Trigger : Line Crossing, Intrusion Detection, Motion detection, Dynamic analysis, Tampering alarm, Network disconnect , IP address conflict, Storage exception
Protocols : TCP/IP,ICMP,HTTP,HTTPS,FTP,DHCP,DNS,DDNS,RTP,RTSP,RTCP,
PPPoE,NTP,UPnP,SMTP,SNMP,IGMP,802.1X,QoS,IPv6,Bonjour
System Compatibility : ONVIF, PSIA, CGI, ISAPI

Interface
Communication Interface : 1 RJ45 10M / 100M Ethernet interface
Alarm Input : 1
Alarm Output : 1
On-board storage : Built-in Micro SD/SDHC/SDXC slot, up to 128 GB

Smart Feature-set
Line Crossing Detection : Cross a pre-defined virtual line
Intrusion Detection : Enter and loiter in a pre-defined virtual region

General
Operating Conditions : -30 ^oC to 60 ^oC (-22 ^oF to 140 ^oF)
Humidity 95% or less (non-condensing)
Power Supply : 12 VDC +/- 10%, PoE (802.3af)
Power Consumption : 7W MAX
Impact Protection : IK08 Protection Level
Weather Proof : IP66
IR Range : 10 meters

Item Dimension (L inchxW inchxH inch)
10 x 4 x 4

Weight
2.00 lb

Warranty Information
3 Years