This document describes ValueRAM's 2G x 72-bit (16GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM), 2Rx8, ECC, memory module, based on eighteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. This 260-pin SODIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:
FEATURES
??? Power Supply: VDD=1.2V Typical
??? VDDQ = 1.2V Typical
??? VPP - 2.5V Typical
??? VDDSPD=2.2V to 3.6V
??? Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
??? Low-power auto self refresh (LPASR)
??? Data bus inversion (DBI) for data bus
??? On-die VREFDQ generation and calibration
??? Single-rank
??? On-board I2 serial presence-detect (SPD) EEPROM
??? 16 internal banks; 4 groups of 4 banks each
??? Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
??? Selectable BC4 or BL8 on-the-fly (OTF)
??? Fly-by topology
??? Terminated control command and address bus
??? PCB: Height 1.18??? (30.00mm)
??? RoHS Compliant and Halogen-Free
CL(IDD)
17 cycles
Row Cycle Time (tRCmin)
45.75ns(min.)
Refresh to Active/Refresh Command Time (tRFCmin)
350ns(min.)
Row Active Time (tRASmin)
32ns(min.)
Maximum Operating Power
Available in detailed datasheet upon request.
UL Rating
94 V - 0
Operating Temperature
0oC to +85oC
Storage Temperature
-55oC to +100oC
Item Dimension (L inchxW inchxH inch)
3 x 7 x 1
Weight
1.00lb
Warranty Information
Lifetime Manufacture