HyperX HX424S14IBK2/8 is a kit of two 512M x 64-bit (4GB) DDR4-2400 CL14 SDRAM (Synchronous DRAM) 1Rx8, memory modules, based on eight 512M x 8-bit DDR4 FBGA components. Total kit capacity is 8GB. Each module supports Intel Extreme Memory Profiles (Intel XMP) 2.0. This module has been tested to run at DDR4-2400 at a low latency timing of 14-14-14 at 1.2V. Additional timing parameters are shown in the PnP Timing Parameters section below. The JEDEC standard electrical and mechanical specifications are as follows:
Features
??? Power Supply: VDD = 1.2V Typical
??? VDDQ = 1.2V Typical
??? VPP - 2.5V Typical
??? VDDSPD = 2.25V to 3.6V
??? On-Die termination (ODT)
??? 16 internal banks; 4 groups of 4 banks each
??? Bi-Directional Differential Data Strobe
??? 8 bit pre-fetch
??? Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
??? Height 1.18??? (30.00mm)
??? JEDEC/PnP: DDR4-2400 CL14-14-14 at 1.2V
??? DDR4-2133 CL13-13-13 at 1.2V
??? XMP
PnP JEDEC Timing Parameters:
??? JEDEC/PnP: DDR4-2400 CL14-14-14 at 1.2V
- DDR4-2133 CL13-13-13 at 1.2V
??? XMP Profile #1: DDR4-2400 CL14-14-14 at 1.2V
CL (IDD)
14 Cycle
Row Cycle Time (tRCmin)
46.75ns (min)
Refresh to Active/Refresh Command Time (tRFCmin)
260ns (min)
Row Active Time (tRASmin)
29.125ns (min)
Maximum Operating Power
TBD W
UL Rating
94V to 0
Operating Temperature
0oC to 85oC
Storage Temperature
-55oC to +100oC
Item Dimension (L"xW"xH")
4 x 7 x 1
Weight
1.00 lb
Warranty Information
Lifetime Manufacture