ValueRAM's KVR24R17S4/8 is a 1G x 72-bit (8GB) DDR4-2400 CL17 SDRAM (Synchronous DRAM) registered w/ parity, 1Rx4, ECC, memory module, based on eighteen 1G x 4-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2400 timing of 17-17-17 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:



Features:



??? Power Supply: VDD=1.2V (1.14V to 1.26V)

??? VDDQ = 1.2V (1.14V to 1.26V)

??? VPP - 2.5V (2.375V to 2.75V)

??? VDDSPD=2.25V to 2.75V

??? Functionality and operations comply with the DDR4 SDRAM datasheet

??? 16 internal banks

??? Bank Grouping is applied, and CAS to CAS latency (tCCD_L, tCCD_S) for the banks in the same or different bank group accesses are available

??? Data transfer rates: PC4-2400. PC4-2133, PC4-1866, PC4-1600

??? Bi-Directional Differential Data Strobe

??? 8 bit pre-fetch

??? Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

??? Supports ECC error correction and detection

??? On-Die Termination (ODT)

??? Temperature sensor with integrated SPD

??? This product is in compliance with the RoHS directive.

??? Per DRAM Addressability is supported

??? Internal Vref DQ level generation is available

??? Write CRC is supported at all speed grades

??? CA parity (Command/Address Parity) mode is supported