Motherboard
MD90-FS0

CPU
Intel Xeon E5-2600 V3 processors
Intel Xeon E5-2600 V4 processors
NOTE: If only 1 CPU is installed, some PCIe, memory, network or I/O functions might be unavailable.

Socket
2 x LGA 2011-3
Mounting pitch: square ILM (80x80mm)
(Max. length of M4 screw threads: 3.7mm)
(Screws longer than 3.7mm might damage the motherboard )

Chipset
Intel C612

Memory
24 x DIMM slots
(DDR4 memory supported only)
Quad channel memory architecture
ECC RDIMM / LRDIMM modules supported
Single and dual rank RDIMM modules up to 32GB supported
3DS LRDIMM modules up to 128GB supported
1.2V modules: 1600/1866/2133/2400 MHz

LAN
2 x GbE LAN ports (Intel I350-BT2)
1 x 10/100/1000 management LAN

Video
Integrated in Aspeed AST2400
2D Video Graphic Adapter with PCIe bus interface
1920x1200 at 60Hz 32bpp

Audio
-

Storage
24 x 2.5 inch hot-swappable HDD/SSD bays
(SAS card required to enable the drive bays )

SATA
2 x Mini-SAS (for 8 x SATA III 6Gb/s ports)
2 x SATA III 6Gb/s ports

SAS
-

RAID
-

Peripheral Drives
-

Expansion Slots
6 x Full-length full-height slots
2 x Half-length full-height slots
1 x PCIe mezzanine type T (Gen3 x8 bus) slot
3 x riser cards:
- 1 x CRS2220
- 1 x CRS2221
- 1 x CRS2240

Internal I/O
1 x 14-pin ATX main power connector
3 x 8-pin ATX 12V power connectors
3 x 4-pin ATX 12V power connectors
2 x Mini-SAS ports
2 x SATA III 6Gb/s ports
2 x CPU fan headers
5 x System fan headers
1 x USB 3.0 header
1 x Front panel header
1 x HDD back plane board header
1 x Chassis intrusion header
1 x PLD header
1 x TPM header
1 x JTAG header
1 x ME update jumper
1 x ME recovery jumper
1 x Clear CMOS jumper
1 x S3 mask jumper
1 x BMC RFB jumper
1 x IPMB connector

Front I/O
1 x Power button with LED
1 x ID button with LED
2 x LAN activity LEDs
1 x HDD activity LED
1 x System status LED
1 x Reset button

Rear I/O
2 x USB 3.0
2 x USB 2.0
3 x RJ45
1 x VGA
1 x Serial
1 x ID button with LED

Backplane I/O
24 x SAS/SATA ports
LSI SAS2x36 expander
Default configuration supports:
0 x SAS/SATA drives SAS card required to enable the drive bays

TPM
1 x TPM header

Power Supply
2 x 1600W redundant PSUs
80 PLUS Platinum
AC input:
- 100-127V/ 12A, 47-63Hz
- 200-240V/ 9.48A, 47-63Hz
DC output:
- 1000W at 100-127V
- 1600W at 200-240V