Form Factor
Proprietary Twin

CPU
Intel Xeon processor E5-2600 and E5-2600 v2 family (BIOS version 3.0 or above is required) (up to 130W TDP)( Motherboard supports this maximum TDP. Please verify your system can thermally support))
Dual Socket R (LGA 2011)

Cache
Up to 30MB

System Bus
QPI up to 8 GT/s

Memory Capacity
16x 240-pin DDR3 DIMM slots
Up to 1TB DDR3 ECC LRDIMM
Up to 512GB DDR3 ECC RDIMM
Up to 128GB DDR3 ECC/non-ECC UDIMM

Memory Type
1866/1600/1333/1066/800MHz ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
(Maximum memory speed may be capped by CPU. Please verify that the chosen CPU can support desired memory speed.)
Support ECC and non-ECC UDIMMs

DIMM Sizes
32GB, 16GB, 8GB, 4GB, 2GB, 1GB, 64GB LRDIMM

Memory Voltage
1.5 V, 1.35 V

Error Detection
Corrects single-bit errors
Detects double-bit errors (using ECC memory)

On-Board Devices
Chipset : Intel C602 chipset
SATA : SATA 2.0 3Gb/s with RAID 0, 1, 5, 10
SATA 3.0 6Gb/s with RAID 0, 1, 5, 10
IPMI : Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
Nuvoton WPCM450 BMC
Network Controllers : Intel X540 Dual port 10GBase-T
Virtual Machine Device Queues reduce I/O overhead
Supports 10GBase-T, 100BASE-TX, and 1000BASE-T, RJ45 output
1x Realtek RTL8201N PHY (dedicated IPMI)
Video : G200 (Nuvoton WPCM450 BMC with graphic controller)
Super I/O : Nuvoton W83527HG

Input / Output
SATA : 4 SATA 2.0 ports (3Gb/s), 2 SATA 3.0 ports (6Gb/s)
LAN : 2 RJ45 Gigabit Ethernet LAN ports , 1 RJ45 Dedicated IPMI LAN port
USB : 5 USB 2.0 ports total (2 rear + 2 via header + 1 Type A)
Video : 1 VGA port
TPM : 1 TPM 1.2 20-pin Header

PCI-Express
1 x16 PCI-E 3.0 slot
1 x8 PCI-E 3.0 slot
1 PCI-E 3.0 x16 + 1 PCI-E 3.0 x8 (for Supermicro storage add-on card)
(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram for details.)

BIOS Type
128Mb SPI Flash EEPROM with AMI BIOS

BIOS Features
Plug and Play (PnP)
APM 1.2
PCI 2.3
ACPI 1.0 / 2.0 / 3.0 / 4.0
USB Keyboard support
SMBIOS 2.7.1
UEFI 2.3.1

Power Configurations
ACPI / APM Power Management
Power-on mode for AC power recovery

PC Health Monitoring
Voltage : Monitors for CPU Cores, +3.3V, +5V, +12V, +3.3V Standby, VBAT, Memory Voltages. ,5+1 Phase-switching voltage regulator
FAN : 2x 4-pin fan headers (up to 2 fans), 4x fans with tachometer monitoring , Status monitor for speed control, Pulse Width Modulated (PWM) fan connectors
Temperature : Monitoring for CPU and chassis environment , CPU thermal trip support , Thermal Control for 8x Fan Connectors , Thermal Monitor 2 (TM2) support , PECI
LED : CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID
Other Features : RoHS

Operating Temperature
10^oC to 35^oC (50^oF to 95^oF)

Non-Operating Temperature Range
40^oC to 70^oC (-40^oF to 158^oF)

Operating Relative Humidity Range
8 percent to 90 percent (non-condensing)

Non-Operating Relative Humidity Range
5 percent to 95 percent (non-condensing)