Device:
Device Type: Indoor L-Shape Pinhole Convert Camera
Image Sensor: Progressive Scan CMOS
Sensor Size: .8inch
Effective Pixels: 1944 (H) x 1224 (V) (2.38 MP)
Day/Night: No
Low Light Sensitivity: Superior
Minimum Illumination: Color: 0.1 lux at F2.5 (30 IRE, 2400K)
Mechanical IR Cut Filter: No
IR Sensitivity Range: No
Electronic Shutter: 1/5 to 1/32,000 sec (manual mode) 1/5 to 1/32,000 sec (auto mode)
Horizontal Resoltuion: 1100 TVL
S/N Ratio: 52dB

Lens:
Focal Length: Zoom, f3.7 to F2.5
Iris: Fixed Iris
Focus: Fixed Focus
Cable Type: RJ12 Connector up to 12mm from Main Unit
Horizontal Viewing Angle: 84.5 Degrees

Video:
Compression: H.264 (Baseline / Main / High profile), MJPEG
Max Frame Rate vs. Resolution: 30 fps at 1920 x 1080 30 fps at 1280 x 720 30 fps at 800 x 600 30fps at 640 x 480 15 fps at 320 x 240
Multi-Streaming: Simultaneous dual streams based on two configurations
Bit Rate: 28 Kbps to 6 Mbps (per stream)
Bit Rate Mode: Constant, Variable
Image Enhancement: Extreme WDR (145 dB) White balance: automatic, hold and manual Brightness Contrast Sharpness Basic WDR (75 dB) White balance: automatic, hold, and manual Brightness Contrast Sharpness (auto) Auto gain control 2D+3D digital noise reduction Flickerless
Privacy Mask: 4 configurable regions
Text Overlay: User defined text on video
Image Orientation: Image flip and mirror

Audio:
Compression: 8 kHz, Mono, PCM, 16 Bit Encoding, G.711
Audio In: Min-In and Line-In, Terminal Block
Audio Out: Line-Out, Terminal Block

Network:
Protocol and Service: TCP, UDP, HTTP, HTTPs, DHCP, PPPoE, RTP, RTSP, IPv4, IPv6, DNS, DDNS, NTP, ICMP, ARP, IGMP, SMTP, FTP, UPnP, SNMP, Bonjour
Ethernet Port: 1, Ethernet (10/100Base-T), RJ-45 Connector
Security: IP address filtering HTTPS encryption Password protected user level Anonymous login IEEE 802.1X network access control

Alarm:
Alarm Trigger: Video motion detection (3 regions) External device through digital input Sound detection
Alarm Response: Notify control center Change camera settings Command other devices E-mail notification with snapshots Save video or snapshot to local storage Upload video or snapshot to FTP Activate external device through digital output

Interface:
Digital Input: 1, Terminal Block
Digital Output: 1, Terminal Block
Serial Port: 1 x RS-232
Local Storage: MicroSDHC/MicroSDXC memory card slot (Card NOT Included)

General:
Power Source/Consumption:
PoE Class 2 (IEEE 802.3af) / 4.32W, DC 12V (Adapter NOT Included) / 3.6W
Environmental Casing: Vibration Proof (EN50155)
Mount Type: Flush, Surface, Tilted Mount, Height Strip
Bundled Accessories: Flush Mount, Surface Mount, Tilted Mount
Starting Temperature: -20 C to 50 C (-40 F to 122 F)
Operating Temperature: -30 C to 60 C (-22 F to 140 F)
Operating Humidity: 10% to 85% RH
Approvals: CE (EN 55022 Class B, EN 55024), FCC (Part15 Subpart B Class B), EN50155, UL (for optional PoE injector and power adapter)

Integration
Unified Solution: Fully compatible with ACTi Software
ISV Integration: Software Development Kit (SDK) Available, ONVIF Compliant
GPS Position: Manual Setting
Firmware Access Browser:
- Microsoft Internet Explorer 8.0 or newer (full functionality) Safari with QuickTime installed, and other browsers with VLC installed (partial functionality)

Item Dimension (L"xW"xH")
8 x 8 x 4

Weight
2.20 lb

Warranty Information
3 Years