Introducing the FlexCage MB973SP-1B, a 3-in-2 Tray-less SATA Backplane Cage for 3.5??? SATA hard drives. This is a commercially designed product in the FlexCage series for use in server environments, such as towers or rackmount. This FlexCage incorporates the best technologies to meet those demands, with second to none fit, function, and reliability.
Space Saving & Tray-less Design
The MB973SP-1B has been designed to maximize space use by allowing up to 3 x 3.5??? SATA III hard drives, while only consuming two 5.25??? device bays. The FlexCage also only requires two 4-pin power ports (or two 15-pin power ports with included 4 pin to 15 pin adapter cables), to power up to three 3.5??? hard drives. In order to further the convenience of the FlexCage, our renowned tray-less technology is integrated into the cage -- no screws or tools are required to insert or eject the drives, making hot swapping a completely hassle free experience. However, because of the tray-less technology used, maintenance becomes dramatically reduced to simply ejecting a failed drive, and then reinserting the replacement.
Flexible Cooling
On the rear of the MB973SP-1B uses a large 80mm cooling fan to pull cool air from the front ventilation slots, over the drives, and exhaust the warm air out through the rear ventilation slots. The Flexcage also features the Active Power Technology power system, so that the fan used and the individual LED are only powered on if a drive is inserted. The included 80mm cooling fan also can be easily replaced and maintained, as the unit is fully removable and replaceable with most aftermarket cooling fans of the same size. To expand the range of compatible fans, both 2 and 3 pin standard fan power ports are available and can be easily accessed.
Color
Black
Drive Fit
3.5inch SATA 1.5 / 3 / 6 Gbit/s hard drive x 3
Drive Bay
5.25" half height device bay x 2
Host Interface
7 pin SATA port x 3
Power Input
4 pin power port x 2 or 15 pin power port x 2 (w/ included 4 to 15 pin adapter cables)
Transfer Rate
Up to 6Gb/sec. (depending on hard drive speed)
Insert and Extract Connection Via
Direct SATA hard drive connection
Structure
Aluminum body w/ partial plastic
Drive Cooling
Removable rear outtake fan w/ aluminum heat dispersion
Cooling Fan Type
80mm ball bearing fan with 2 or 3 pin connector
Power Indicator
Blue LED
HDD Access Indicator
Flashing Blue LED
Item Dimension (L"xW"xH")
8.51 x 5.63 x 11
Weight
3.17 lb
Warranty Information
3 Years