Ship to USA and Canada ONLY
ActForNet Quotation/Store System Upgraded. Click Now To Enjoy!
  • S5320-52X-PWR-SI-ACF PoE Switch

S5320-52X-PWR-SI Bundle(48 Ethernet 10/100/1000  PoE+ ports,4 10 Gig SFP+,with 1150W AC power supply)

Introduction

Huawei S5300 series gigabit switches are new generation Ethernet gigabit switches that meet the requirements for high-bandwidth access and Ethernet multi-service convergence, providing powerful Ethernet functions for operators and enterprise customers. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP), the S5300 features large capacity and gigabit interfaces of high density, provides 10G uplinks, meeting the requirements for the 1G and 10G uplink devices of high density. 

The S5300 can meet the requirements of multiple scenarios such as service convergence on campus networks and Intranets, the access to the IDC at a rate of 1000 Mbit/s, and the access to computers at a rate of 1000 Mbit/s on Intranets.
 

Product Features

 Innovative Energy Saving Design

The S5300-LI offer customers extensive selection of energy-saving with standard mode, basic mode and advanced mode that accommodates most needs. By matching port link down/up, optical-module in-place/out of place, port shut down/undo shutdown, idle period, busy period to increase the proportion of the dynamic energy-saving to reduce the power consumption.The S5300-LI series reduces energy consumption without compromising system performance,ensuring good user experience. The S5300-LI adopts multiple cutting-edge energy-saving designs,including Energy Efficient Ethernet (EEE), port energy detection, dynamic CPU frequency adjustment, and device sleeping.


 Comprehensive reliability mechanisms

Besides STP, RSTP, and MSTP, the S5300-LI supports enhanced Ethernet reliability technologies, such as Smart Link and RRPP (Rapid Ring Protection Protocol), which implement millisecond-level protection switchover and ensure network reliability. The S5300 also provides Smart Link multi-instance and RRPP multi-instance to implement load balancing among links, optimizing bandwidth usage.

The S5300-LI supports the Smart Ethernet Protection (SEP) protocol, a ring network protocol applied to the link layer on an Ethernet network. SEP can be used on open ring networks and can be deployed on upper-layer aggregation devices to provide fast switchover (within 50 ms), ensuring continuous transmission of services. SEP features simplicity, high reliability, fast switchover, easy maintenance, and flexible topology, facilitating network planning and management. The S5300-LI supports Ethernet Ring Protection Switching (ERPS), also referred to as G.8032. As the latest ring network protocol, ERPS was developed based on traditional Ethernet MAC and bridging functions and uses mature Ethernet OAM function and a ring automatic protection switching (R-APS) mechanism to implement millisecond-level protection switching. ERPS supports various services and allows flexible networking, helping customers build a network with lower OPEX and CAPEX. Complying with IEEE 802.3ah and 802.1ag, the S5300-LI supports point-to-point Ethernet fault management and can detect faults in the last mile of an Ethernet link to users. The S5300-LI supports Y.1731. Besides fast end-to-end service fault detection, the S5300-LEI can use the performance measurement tools defined in Y.1731 to monitor network performance, providing accurate data about network quality.

 Well-designed QoS policies and security mechanisms
The S5300-LI implements complex traffic classification based on packet information, such as the 5-tuple, IP preference, ToS, DSCP, IP protocol type, ICMP type, TCP source port, VLAN ID, Ethernet protocol type, and CoS. ACLs can be applied to inbound or outbound directions on an interface. The S5300 supports a flow-based two-rate three-color CAR. Each port supports eight priority queues and multiple queue scheduling algorithms, such as WRR, DRR, PQ, WRR+PQ, and DRR+PQ. All of these ensure the quality of voice, video, and data services.

The S5300-LI provides multiple security measures to defend against Denial of Service (DoS) attacks, as well as attacks against networks or users. DoS attack types include SYN Flood attacks, Land attacks, Smurf attacks, and ICMP Flood attacks. Attacks to networks refer to STP BPDU/root  attacks. Attacks to users include bogus DHCP server attacks, man-in-the-middle attacks, IP/MAC spoofing attacks, and DHCP request flood attacks. DoS attacks that change the CHADDR field in DHCP packets are also attacks against users.

The S5300-LI supports DHCP snooping, which generates user binding entries based on MAC addresses, IP addresses, IP address leases, VLAN IDs, and user access interfaces. DHCP snooping discards invalid packets that do not match any binding entries, such as ARP spoofing packets and IP spoofing packets. This prevents hackers from using ARP packets to initiate man-in-the-middle attacks on campus networks. The interface connected to a DHCP server can be configured as a trusted interface to protect the system against bogus DHCP server attacks.

The S5300-LI supports strict ARP learning, which prevents ARP spoofing attacks that exhaust ARP entries. It also provides IP source checks to prevent DoS attacks caused by MAC address spoofing,
IP address spoofing, and MAC/IP spoofing.

The S5300-LI supports centralized MAC address authentication, 802.1x authentication, and NAC. It authenticates users based on statically or dynamically bound user information, such as the user name, IP address, MAC address, VLAN ID, access interface, and flag indicating whether antivirus software is installed. VLANs, QoS policies, and ACLs can be dynamically applied to users. The S5300-LI can limit the number of MAC addresses learned on an interface to prevent attackers from exhausting MAC address entries by using bogus source MAC addresses. This function minimizes the packet flooding that occurs when users' MAC addresses cannot be found in the MAC address table.


 Maintenance-free design and manageability
The S5300-LI supports automatic configuration, plug-and-play features, and batch remote upgrades. These capabilities simplify device management and maintenance and reduce maintenance costs. The S5300 supports SNMP v1/v2/v3 and provides flexible methods for managing devices. Users can manage the S5300 using the CLI, Web NMS and Telnet. The NQA function assists users with network planning and upgrades. In addition, the S5300 supports NTP, SSH v2, HWTACACS, RMON, log hosts, and port-based traffic statistics.

The S5300-LI supports GARP VLAN Registration Protocol (GVRP), which dynamically distributes, registers, and propagates VLAN attributes to reduce manual configuration workloads of network administrators and ensure correct VLAN configuration. In a complex network topology, GVRP simplifies VLAN configuration and reduces network communication faults caused by incorrect VLAN configuration.

The S5300-LI supports MUX VLAN. MUX VLAN isolates the Layer 2 traffic between interfaces in a VLAN. Interfaces in a subordinate separate VLAN can communicate with ports in the principal VLAN, but cannot communicate with each other. MUX VLAN is typically used on an enterprise intranet to isolate user interfaces from each other while still allowing them to communicate with server interfaces. This function prevents communication between network devices connected to certain interfaces or interface groups, but allows these devices to communicate with the default 
gateway.


 High scalability
The S5300-LI supports intelligent stacking (iStack). Multiple S5300s can be connected with stack cables to set up a stack, which functions as a virtual switch. A stack consists of a master switch, a backup switch, and several slave switches. The backup switch takes over services when the master switch fails, reducing service interruption time. Stacks support intelligent upgrades so that users do not need to change the software version of a switch when adding it to a stack. The iStack function allows users to connect multiple switches with stack cables to expand the system capacity. These switches can be managed using a single IP address, which greatly reduces the costs of system expansion, operation, and maintenance. Compared with traditional networking technologies, iStack has distinct advantages regarding scalability, reliability, and system architecture.

 

Specification

Item

S5306TP-LI

S5300-SI

S5300-EI

S5300HI

Fixed port

S5306TP-LI: four 10/100/1000Base-T ports and two gigabit Combo ports

S5324TP-SI/S5324TP-PWR-SI/S5328C-SI/S5328C-PWR-SI:

twenty 10/100/1000Base-T ports and four gigabit Combo ports

S5348TP-SI/S5348TP-PWR-SI:

forty-four 10/100/1000Base-T ports and four gigabit Combo ports 

S5352C-SI/S5352C-PWR-SI: forty-eight 10/100/1000Base-T ports 

S5328C-EI/S5328C-PWR-EI: twenty-four 10/100/1000Base-T ports

S5328C-EI-24S: twenty 100/1000Base-X ports and four gigabit Combo ports 

S5352C-EI/S5352C-PWR-EI: forty-eight 10/100/1000Base-T ports

S5328C-HI: twenty-four 10/100/1000Base-T ports

S5328C-HI-24S: twenty-four 100/1000Base-X ports

Extended slot

The S5306 has no extended slot.

The 5300TP provides a stacking extended slot.

The S5300C provide

Write a review

Please login or register to review

S5320-52X-PWR-SI-ACF PoE Switch

  • Brands Huawei
  • Product Code: S5320-52X-PWR-SI-ACF
  • Availability: In Stock
  • $3,739.68

  • Ex Tax: $3,739.68

Tags: s5320-36pc-ei-ac, switch, s5300, gigabit s5320-36pc-ei-dc s5320-56pc-ei-ac s5320-52p-ei-ac s5320-52p-si-ac s5320-52x-si-ac s5320-52x-pwr-si-ac, poe s5320-52x-pwr-si-acf