Ship to USA and Canada ONLY
ActForNet Quotation/Store System Upgraded. Click Now To Enjoy!
  • NX112 switch board, 4*GE port(RJ45)+2*10GE port uplink

Summary

Introduction

The Tecal NX112 switch module (hereinafter referred to as the NX112) serves as a switch device of the Tecal E6000 server system (hereinafter referred to as the E6000). The NX112s work at layer 2 and layer 3 and they are installed at the rear side of the Tecal E6000 server shelf and connected to server blades and management modules (MMs) through the backplane. The NX112s perform switching of internal data packets and control management packets to provide high-speed data transmission for users.
NOTE:

The NX112 adopts the same software technology as HUAWEI Quidway S5300 series Ethernet switches. For details about the NX112 commands and features, see the S5300 product documents. You can select the reference documents of the same version in the S5300 Product Catalog based on the version information of the NX112.

Functions

Function

Description

Network switching

The following is supported:

  • Full linear speed switching at layer 2 and layer 3

  • Port binding

  • Port mirror

  • Filtering packets

  • MAC address aging, MAC address restriction, and MAC address auto-learn

  • Inserting, deleting, and viewing MAC address entries using the software

  • Suppressing broadcast storms

  • IPv4 and IPv6

  • VLAN translation, and independent VLAN learning

  • Priority queue of output interfaces

  • Subrack stacking

  • Multiple gigabit interface standards (such as 10/100/1000 Base-T and 1000 Base-X)

  • IEEE 802.1Q VLAN

  • IEEE 802.1D spanning tree and multi-spanning tree

  • Jumbo-frame packets of 9.7 KB

System management

An independent CPU module is provided. The CPU module connects to the switch module through the Peripheral Component Interconnect (PCI) bus and provides the following functions:
  • Initializing the switch module configurations and dynamically managing the switch module.

  • Monitoring the operating status of the NX112.

  • Processing protocol packets.

 

Performance Specifications

Item

Specification

Description

Number of ports

30

The 30 ports provided are describes as follows:

  • Twenty 1000Base-X interfaces, connecting to 10 blade slots through the backplane connector.

  • One 10/100Base-T management network interface, connecting to the MM of the E6000 server through the backplane.

  • Four 1000Base-X interfaces, providing four external GE electrical interfaces using one electrical interface card.

  • Two 10GE SFP optical interfaces.

  • Two 12G shelf stacking interfaces.

  • One management serial port.

Port rate

10/100/1000M

Interfaces support 10/100/1000M auto-adaptation and full line speed switching.

Switching capacity

132 Gbit/s

Full duplex mode.

Maximum number of source MAC addresses

32

The maximum number of source MAC addresses to be filtered at a time is 32.

Capacity of the MAC address table

32000

The MAC address table can hold a maximum of 32000 MAC addresses for auto-learn.

Maximum number of VLANs

4000

Complies with IEEE 802.1Q.

Maximum number of packets in a priority queue

8

Complies with IEEE 802.1D.

Maximum number of ports for binding

832

Complies with IEEE 802.3AD and supports a maximum of eight ports at the same rate for binding.

Write a review

Please login or register to review

NX112 switch board, 4*GE port(RJ45)+2*10GE port uplink

  • Brands Huawei
  • Product Code: BC0D00EFGF00
  • Availability: In Stock
  • $820.00

  • Ex Tax: $820.00

Related Products

E6000 Integrated Frame(include Data Mangerment Board)

E6000 Integrated Frame(include Data Mangerment Board)

The E6000 chassis is 8 U high and features an optimized layout structure to maximally use space. It ..

$1,089.00 Ex Tax: $1,089.00

E6000H Integrated Frame(include Data Mangerment Board)

E6000H Integrated Frame(include Data Mangerment Board)

The E6000H chassis adopts the optimized layout and space design from the E6000 chassis, and uses a h..

$3,060.00 Ex Tax: $3,060.00

NX113 switch board, 4*GE port(optical)+2*10GE port uplink

NX113 switch board, 4*GE port(optical)+2*10GE port uplink

Summary Introduction The Tecal NX113 switch module (hereinafter referred to as the NX113) ..

$836.00 Ex Tax: $836.00

BH622 V2 Sandy-Bridge Romley EP Balde Server

BH622 V2 Sandy-Bridge Romley EP Balde Server

The BH622 V2 delivers extremely high-density computing capabilities and a large memory capacity. It ..

$1,046.00 Ex Tax: $1,046.00

NX230 8*10GE Switch for E series Blade Servers

NX230 8*10GE Switch for E series Blade Servers

Summary Introduction The NX230 10GE switch module (NX230 for short) serves as a 10GE switc..

$7,462.00 Ex Tax: $7,462.00

NX220 8G FC Switch Module for E Series Blade Servers

NX220 8G FC Switch Module for E Series Blade Servers

Summary Introduction The Huawei NX220 8G FC switch module (short for NX220) is a high-perf..

$5,969.00 Ex Tax: $5,969.00

Tags: nx112, switch, board, , 4*ge, port(rj45)+2*10ge, uplink, servers series, blade