| SmartAX MA5633 | ||
|---|---|---|
| Parameters | Item | Description |
| General parameters | Dimensions (H×W×D) | 400mm×153mm×275mm |
| Weight | 8.6 kg | |
| Power supply mode | 220 V AC local power supply, 60 V AC cable power supply | |
| Working voltage range | 60 V AC cable power supply: input 35 V to 90 V 220 V AC local power supply: input 90 V to 300 V | |
| Power of the integrated device | Without a power amplifier: 39 W With a power amplifier: 93 W | |
| IP protection level | IP65 | |
| Surge protection indicator | Power supply port: 6 kV (in common and differential modes) Strong current: 3 kA in differential mode; 5 kA in common mode RF port Impulse Current: 3kA | |
| Working temperature | -40℃ to +55℃ | |
| EMC | Class B | |
| Installation mode | In an outdoor cabinet, on a wall, or cable-mounting | |
| Ports | Uplink port | GPON/EPON/GE |
| RF port | Two options for CATV signal input and output: 1. Two input RF ports and two output RF ports 2. Four input RF ports and four output RF ports An input RF port connects to the output RF port on an optical receiver. An output RF port connects to a CM. Port type: T type (ANSI/SCTE 406-1998) and KS type (optional) | |
| Other ports | One GE electrical port, one commissioning serial port, and one maintenance Ethernet port | |
| CATV parameters | Channel frequency range | Downlink: 87–1002 MHz Uplink: 5–65 MHz |
| Channel width | Uplink: 1.6 MHz, 3.2 MHz, and 6.4 MHz Downlink: 6 MHz (American standard)/8 MHz(European standard) | |
| Single channel frequency width | Downlink: 50M bit/s Uplink: 40M bit/s | |
| Modulation mode | Downlink: QAM modulation and 64/256 QAM/1024 QAM Uplink: ATDMA/SCDMA modulation and QPSK/16 QAM/64 QAM/256 QAM | |
| Maximum bandwidth | Downlink: 800M bit/s Uplink: 160M bit/s | |
| Number of terminals | 256 | |
| Standard compliance | DOCSIS 2.0/DOCSIS 3.0 Euro-DOCSIS 2.0/Euro-DOCSIS 3.0 | |
| Transmit level | Without a power amplifier: Transmit level of a single channel:107dBuv Transmit level of 16 channels:92dBuv With a power amplifier: Transmit level of a single channel:126dBuv Transmit level of 16 channels: 111dBuv | |
| Reflection loss | > 12 dB (54–1002 MHz) > 10 dB (870–1002 MHz) | |
| Input/output impedance | 75 ohms | |
| Delay | < 1 ms | |
| Power amplifier gain (optional) | 20 dB | |
| Load balance | Load balance based on service stream bandwidth | |
| Channel bonding | Bonding of a maximum of 16 channels in the downstream direction and four channels in the upstream direction |
|