Ship to USA and Canada ONLY

Huawei S5700-EI Enhanced Gigabit Switches

The S5700-EI series gigabit enterprise switches (S5700-EI) are next-generation energy-saving switches developed by Huawei to meet the demand for high-bandwidth access and Ethernet multi-service aggregation. Based on the cutting-edge hardware and Huawei Versatile Routing Platform (VRP) software, the S5700-EI provides a large switching capacity and high-density GE ports to implement 10 Gbit/s upstream transmissions. The S5700-EI is for use in various enterprise network scenarios. For example, it can function as an access or aggregation switch on a campus network, a gigabit access switch in an Internet Data Center (IDC), or a desktop switch to provide 1,000 Mbit/s access for terminals. The S5700-EI is easy to install and maintain, reducing workloads for network planning, construction, and maintenance. The S5700-EI uses advanced reliability, security, and energy conservation technologies, helping enterprise customers build a next-generation IT network.

Note: S5700-EI mentioned in this document refers to the whole S5700-EI series including S5710-EI, and descriptions about S5710-EI are unique features of S5710-EI.

Product Appearance

Appearance Description

S5700-28C-ei

S5700-28C-EI

  • 24 Ethernet 10/100/1,000 ports
  • Subcards supported: 4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard
  • Double hot-swappable AC/DC power supplies
  • Forwarding performance: 96 Mpps
  • Switching capacity: 256 Gbit/s                

     

S5700-28C-EI-24S

S5700-28C-EI-24S

  • 24 Gig SFP, 4 of which are dual-purpose 10/100/1,000 or SFP ports
  • Subcards supported: 4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard
  • Double hot-swappable AC/DC power supplies
  • Forwarding performance: 96 Mpps
  • Switching capacity: 256 Gbit/s 

S5700-28C-PWR-EI

S5700-28C-PWR-EI

  • 24 Ethernet 10/100/1,000 ports
  • Subcards supported: 4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard
  • Double hot-swappable AC power supplies
  • PoE+
  • Forwarding performance: 96 Mpps
  • Switching capacity: 256 Gbit/s 

S5700-52C-EI

S5700-52C-EI

  • 48 Ethernet 10/100/1,000 ports
  • Subcards supported: 4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard
  • Double hot-swappable AC/DC power supplies
  • Forwarding performance: 132 Mpps
  • Switching capacity: 256 Gbit/s 

S5700-52C-PWR-EI

S5700-52C-PWR-EI

  • 48 Ethernet 10/100/1,000 ports
  • Subcards supported: 4 x 1,000 Base-X SFP subcard, 2 x 10 GE SFP+ subcard, and 4 x 10 GE SFP+ subcard
  • Double hot-swappable AC power supplies
  • PoE+
  • Forwarding performance: 132 Mpps
  • Switching capacity: 256 Gbit/s 

S5710-28C-EI

S5710-28C-EI

  • 24 Ethernet 10/100/1,000 ports, 4 of which are dual-purpose 10/100/1,000 or SFP, 4 10 Gig SFP+ ports
  • Subcards supported: 2 x 10 GE SFP+ subcard, 8 x 10/100/1,000 BASE-T subcard, and 8 x 1,000 Base-X subcard
  • Double hot-swappable AC/DC power supplies
  • Forwarding performance: 156 Mpps
  • Switching capacity: 416 Gbit/s 

S5710-28C-PWR-EI-AC

S5710-28C-PWR-EI-AC

  • 24 Ethernet 10/100/1,000 ports, 4 of which are dual-purpose 10/100/1,000 or SFP, 4 10 Gig SFP+ ports
  • Subcards supported: 2 x 10 GE SFP+ subcard, 8 x 10/100/1,000 BASE-T subcard, and 8 x 1,000 Base-X subcard
  • Double hot-swappable AC power supplies, including one 580W AC power unit
  • PoE+
  • Forwarding performance: 156 Mpps
  • Switching capacity: 416 Gbit/s 

S5710-52C-EI

S5710-52C-EI

  • 48 Ethernet 10/100/1,000 ports, 4 10 GE SFP+ ports
  • Subcards supported: 2 x 10 GE SFP+ subcard, 8 x 10/100/1,000 BASE-T subcard, and 8 x 1,000 Base-X subcard
  • Double hot-swappable AC/DC power supplies
  • Forwarding performance: 192 Mpps
  • Switching capacity: 416 Gbit/s

S5710-52C-PWR-EI-AC

S5710-52C-PWR-EI-AC

S5710-52C-PWR-EI

  • 48 Ethernet 10/100/1,000 ports, 4 10 GE SFP+ ports
  • Subcards supported: 2 x 10 GE SFP+ subcard, 8 x 10/100/1,000 BASE-T subcard, and 8 x 1,000 Base-X subcard
  • Double hot-swappable AC power supplies (A 580W AC power unit is included in S5710-52C-PWR-EI-AC model while there is no power unit in S5710-52C-PWR-EI)
  • PoE+
  • Forwarding performance: 192 Mpps
  • Switching capacity: 416 Gbit/s 

 

Product Characteristics

 

Powerful support for services

  • The S5700-EI supports IGMP v1/v2/v3 snooping, IGMP filter, IGMP fast leave, and IGMP proxy. It supports line-speed replication of multicast packets between VLANs, multicast load balancing among member interfaces of a trunk, and controllable multicast, meeting requirements for IPTV services and other multicast services.
  • The S5700-EI provides the Multi-VPN-Instance CE (MCE) function to isolate users in different VPNs on a device, ensuring data security and reducing costs.
  • The S5710-EI supports multiple MPLS & VPN features, including Label Distribution Protocol (LDP) or Resource Reservation Protocol for Traffic Engineering (RSVP-TE), MPLS TE, VLL, VPLS, and MPLS L3VPN.

Comprehensive reliability mechanisms

  • Besides STP, RSTP, and MSTP, the S5700-EI supports enhanced Ethernet reliability technologies such as Smart Link and Rapid Ring Protection Protocol (RRPP), which implement millisecond-level protection switchover and ensure network reliability. It also provides Smart Link multi-instance and RRPP multi-instance to implement load balancing among links, optimizing bandwidth usage.
  • The S5700-EI supports Enhanced Trunk (E-Trunk) that enables a CE to be dual-homed to two PEs (S5700s). E-Trunk greatly enhances link reliability between devices and implements link aggregation between devices. This improves reliability of access devices.
  • The S5700-EI supports the Smart Ethernet Protection (SEP) protocol, a ring network protocol applied to the link layer on an Ethernet network. SEP can be used on open ring networks and can be deployed on upper-layer aggregation devices to provide fast switchover (within 50 ms), ensuring non-stop transmission of services. SEP features simplicity, high reliability, fast switchover, easy maintenance, and flexible topology, facilitating network planning and management.
  • The S5700-EI supports Ethernet Ring Protection Switching (ERPS), also referred to as G.8032. As the latest ring network protocol, ERPS was developed based on traditional Ethernet MAC and bridging functions and uses mature Ethernet OAM function and a Ring Automatic Protection Switching (R-APS) mechanism to implement millisecond-level protection switching. ERPS supports various services and allows flexible networking, helping customers build a network with lower OPEX and CAPEX.
  • The S5700-EI supports redundant power supplies, and can use an AC power supply and a DC power simultaneously. Users can choose a single power supply or use two power supplies to ensure device reliability.
  • The S5700-EI supports VRRP, and can set up VRRP groups with other Layer 3 switches. VRRP provides redundant routes to ensure stable and reliable communication. Multiple equal-cost routes to an uplink device can be configured on the S5700-EI to provide route redundancy. When an active route is unreachable, traffic is switched to a backup route.
  • The S5700-EI supports Bi-directional Forwarding Detection (BFD) and provides millisecond-level detection for protocols such as OSPF, IS-IS, VRRP, and PIM to improve network reliability. The S5700-EI complies with IEEE 802.3ah and 802.1ag. IEEE 802.3ah defines the mechanism for detecting faults on direct links over the Ethernet in the first mile, and 802.1ag defines the mechanism for end-to-end service fault detection. The S5700-EI supports Y.1731. Besides fast end-to-end service fault detection, the S5700-EI can use the performance measurement tools defined in Y.1731 to monitor network performance, providing accurate data about network quality.

Well-designed QoS policies and security mechanisms

  • The S5700-EI implements complex traffic classification based on packet information such as the 5-tuple, IP precedence, ToS, DSCP, IP protocol type, ICMP type, TCP/UDP port number, VLAN ID, Ethernet protocol type. ACLs can be applied to inbound or outbound direction on an interface. The S5700-EI supports a flow-based two-rate three-color CAR. Each port supports eight priority queues and multiple queue scheduling algorithms such as WRR, DRR, SP, WRR + SP, and DRR + SP. All of these ensure the quality of voice, video, and data services.
  • The S5700-EI provides multiple security measures to defend against Denial of Service (DoS) attacks, and attacks against networks or users. DoS attack types include SYN Flood attacks, Land attacks, Smurf attacks, and ICMP Flood attacks. Attacks to networks refer to STP BPDU/root attacks. Attacks to users include bogus DHCP server attacks, man-in-the-middle attacks, IP/MAC spoofing attacks, DHCP request flood attacks. DoS attacks that change the CHADDR field in DHCP packets are also attacks against users.
  • The S5700-EI supports DHCP snooping, which discards invalid packets that do not match any binding entries, such as ARP spoofing packets and IP spoofing packets. This prevents man-in-the-middle attacks to campus networks that hackers initiate by using ARP packets. The interface connected to a DHCP server can be configured as a trusted interface to protect the system against bogus DHCP server attacks.
  • The S5700-EI supports strict ARP learning, which prevents ARP spoofing attacks that will exhaust ARP entries. It also provides IP source check to prevent DoS attacks caused by MAC address spoofing, IP address spoofing, and MAC/IP spoofing.
  • The S5700-EI supports 802.1x authentication, MAC address authentication, and combined authentication on a per port basis, as well as Portal authentication on a per VLANIF interface basis. The S5700-EI also supports NAC. The S5700-EI authenticates users based on statically or dynamically bound user information such as the user name, IP address, MAC address, VLAN ID, access interface, and flag indicating whether antivirus software is installed. VLANs, QoS policies, and ACLs can be applied to users dynamically.
  • The S5700-EI can limit the number of MAC addresses learned on an interface to prevent attackers from exhausting MAC address entries by using bogus source MAC addresses. This function minimizes packet flooding that occurs when MAC addresses of users cannot be found in the MAC address table.

Fine-grained traffic management

  • The S5710-EI supports NetStream. The NetStream module supports V5, V8, and V9 packet formats and provides various traffic analysis functions, such as real-time traffic sampling, dynamic report generation, traffic attribute analysis, and traffic exception report. The Netstream module enables administrators to monitor network status in real time and provides applications and analysis functions including potential fault detection, effective fault rectification, fast problem handling, and security monitoring, to help customers optimize network structure and adjust resource deployment.
  • The S5700-EI supports the Sampled Flow (sFlow) function, which uses a sampling mechanism to obtain statistics about traffic forwarded on a network and sends the statistics to the Collector in real time. The Collector analyzes traffic statistics to help customers manage network traffic efficiently. The S5700-EI integrates the sFlow Agent module and uses hardware for traffic monitoring. Unlike traffic monitoring through port mirroring, sFlow does not degrade network performance during traffic monitoring.

Easy deployment and maintenance free

  • The S5700-EI supports automatic configuration, plug-and-play, and batch remote upgrade. These capabilities simplify device management and maintenance and reduce maintenance costs. The S5700-EI supports SNMP v1/v2c/v3 and provides flexible methods for managing devices. Users can manage the S5700-EI using the CLI and Web NMS. The NQA function helps users with network planning and upgrading. In addition, the S5700-EI supports NTP, SSH v2, HWTACACS+, RMON, log hosts, and port-based traffic statistics.
  • EasyDeploy: The Commander collects information about the topology of the client connecting to the Commander and saves client startup information based on the topology. The client can be replaced without configuration. Configuration and scripts can be delivered to the client in batches. In addition, the configuration delivery result can be queried. The Commander can collect and display power consumption on the entire network.
  • The S5700-EI supports the GARP VLAN Registration Protocol (GVRP), which dynamically distributes, registers, and propagates VLAN attributes to reduce manual configuration workloads of network administrators and to ensure correct VLAN configuration. In a complex network topology, GVRP simplifies VLAN configuration and reduces network communication faults caused by incorrect VLAN configuration.
  • The S5700-EI supports MUX VLAN. MUX VLAN isolates Layer 2 traffic between interfaces in a VLAN. Interfaces in a subordinate separate VLAN can communicate with ports in the principal VLAN but cannot communicate with each other. MUX VLAN is usually used on an enterprise intranet to isolate user interfaces from each other but allow them to communicate with server interfaces. This function prevents communication between network devices connected to certain interfaces or interface groups but allows the devices to communicate with the default gateway.

PoE function

  • The S5700-EI PWR can use PoE power supplies with different power levels to provide -48V DC power for Powered Devices (PDs) such as IP phones, WLAN APs, and Bluetooth APs. In its role as Power Sourcing Equipment (PSE), the S5700-EI PWR complies with IEEE 802.3af and 802.3at (PoE+) and can work with PDs that are incompatible with 802.3af or 802.3at. Each port provides a maximum of 30W power, complying with IEEE 802.3at. The PoE+ function increases the maximum power of each port and implements intelligent power management for high-power consumption applications. This facilitates the use of PDs. PoE ports can work in power-saving mode. The S5700-EI PWR provides improved PoE solutions. Users can configure whether and when a PoE port supplies power.

High scalability

  • The S5700-EI supports intelligent stacking (iStack). Multiple S5700-EI switches can be connected with stack cables to set up a stack, which functions as a virtual switch. A stack consists of a master switch, a backup switch, and several slave switches. The backup switch takes over services when the master switch fails, reducing service interruption time. Stacks support intelligent upgrade so that users do not need to change the software version of a switch when adding it to a stack.
  • The iStack function allows users to connect multiple switches with stack cables to expand system capacity. These switches can be managed using a single IP address, which greatly reduces the costs of system expansion, operation, and maintenance. Compared with traditional networking technologies, iStack has advantages in scalability, reliability, and system architecture.

Various IPv6 features

  • The S5700-EI supports IPv4/IPv6 dual stack and can migrate from an IPv4 network to an IPv6 network. S5700-EI hardware supports IPv4/IPv6 dual stack, IPv6 over IPv4 tunnels (including manual tunnels, 6to4 tunnels, and ISATAP tunnels), and Layer 3 line-speed forwarding. The S5700-EI can be deployed on IPv4 networks, IPv6 networks, or networks that run both IPv4 and IPv6. This makes networking flexible and enables easy migration from IPv4 to IPv6

 

Product Specification

Item S5700-28C-EI/

S5700-28C-PWR-EI
S5700-28C-EI-24S S5700-52C-EI/ S5700-52C-PWR-EI S5710-28C-EI




S5710-28C-PWR-EI-AC
S5710-52C-EI


S5710-52C-PWR-EI




S5710-52C-PWR-EI-AC
Fixed Ports 24 x 10/100/1,000 Base-T 24 x 100/1,000 Base-X, 4 of which are dual-purpose 10/100/1,000 or SFP 48 x 10/100/1,000 Base-T 24 x 10/100/1,000 Base-T, 4 of which are dual-purpose 10/100/1,000 or SFP, 4 x 10 GE SFP+ 48 x 10/100/1,000 Base-T,4 x 10 GE SFP+
Extended Slots

S5700C provides two extended slots, one for an uplink subcard and the other for a stack card.

S5710C providestwo extended slots for uplink subcards.

MAC Address Table

IEEE 802.1d compliance

32K MAC

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

VLAN

4K VLANs

Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

1:1 and N:1 VLAN Mapping

Reliability

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover

SEP

ERPS (G.8032)

BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM

STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s)

BPDU protection, root protection, and loop protection

E-Trunk

IP Routing Static routing, RIPv1/v2, RIGng, OSPF, OSPFv3, IS-IS, IS-ISv6, BGP, BGP4+, and ECMP
IPv6 Features

Neighbor Discovery (ND)

Path MTU (PMTU)

IPv6 ping, IPv6 tracert, and IPv6 Telnet

ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type

MLD v1/v2 snooping

IPv4 and IPv6 dual stack

6to4 tunnel, ISATAP tunnel, and manually configured tunnel

Multicast

IGMP v1/v2/v3 snooping and IGMP fast leave

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk

Controllable multicast

Port-based multicast traffic statistics

IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM

MSDP

QoS/ACL

Rate limiting on packets sent and received by an interface

Packet redirection

Port-based traffic policing and two-rate three-color CAR

Eight queues on each port

WRR, DRR, PQ, WRR + PQ, and DRR + PQ queue scheduling algorithms

WRED (supported by the S5710-EI)

Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source

IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID

Rate limiting in each queue and traffic shaping on ports

Security

User privilege management and password protection

DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, interface, and VLAN

Port isolation, port security, and sticky MAC

Blackhole MAC address entries

Limit on the number of learned MAC addresses

802.1x authentication and limit on the number of users on an interface

AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC

SSH v2.0

Hypertext Transfer Protocol Secure (HTTPS)

CPU defense

Blacklist and whitelist

Management and Maintenance

iStack

MAC Forced Forwarding (MFF)

Virtual cable test

SNMP v1/v2c/v3

RMON

Web NMS

System logs and alarms of different levels

NetStream (supported by S5710-EI)

sFlow

Interoperability

Supports VBST (Compatible with PVST/PVST+/RPVST)

Supports LNP (Similar to DTP)
Supports VCMP (Similar to VTP)
Operating Environment

Operating temperature: 0°C to 50°C

Relative humidity: 5% to 95% (non-condensing)

Input voltage

AC:

Rated voltage range: 100V to 240V AC, 50/60 Hz Maximum voltage range: 90V to 264V AC, 50/60 Hz

DC:

Rated voltage range: –48V to –60V, DC Maximum voltage range: –36V to –72V, DC

Note: PoE-support switches do not use DC power supplies.

Dimensions (W x D x H)

442 mm x 420 mm x 43.6 mm

Power Consumption

Non-PoE model: < 60W

PoE model: < 842W

(PoE: 740W)

< 63W

Non-PoE model: < 88W

PoE model: < 930W

(PoE: 740W)

Non-PoE model:< 100W

PoE model: < 942W

(PoE: 740W)

Non-PoE model:< 165W

PoE model:< 1,043W with two 580W

AC supplies (PoE: 740W), or < 1,625W with two 1,150W

AC supplies (PoE: 1,440W)

The product information may contain the product functions provided in future. For the actual product specifications, contact Huawei local sales office.
*:The S5700 switches of the EI series are collectively called S5700-EI. S5710-EI is a sub-series switches of S5700-EI.

Deployment Scenarios

On Large-sized Enterprise Networks

The S5700-EI can function as an access device on a large-sized enterprise network or an aggregation device on a small-or medium-sized campus network. It supports link aggregation and dual-homing to improve network reliability.

In Data Centers

The S5700-EI can be used in a data center. It connects to gigabit servers and aggregates traffic from the servers to uplink devices through trunk links. If multiple servers are available, an S5700 stack can be used to facilitate network maintenance and improve network reliability.

 

Ordering Information

Product Description
S5700-28C-EI-24S (24 x Gig SFP, 4 of which are dual-purpose 10/100/1,000 or SFP, with 1 interface slot)
S5700-28C-EI (24 x Ethernet 10/100/1,000 ports ,4 of which are dual-purpose 10/100/1,000 or SFP, with 1 interface slot)
S5710-28C-EI (24 x Ethernet 10/100/1,000 ports, 4 of which are dual-purpose 10/100/1,000 or SFP, 4 x 10 Gig SFP+, without power module)
S5700-28C-PWR-EI (24 x Ethernet 10/100/1,000 PoE+ ports, with 1 interface slot)
S5710-28C-PWR-EI-AC (24 x Ethernet 10/100/1,000 PoE+ ports, 4 of which are dual-purpose 10/100/1,000 or SFP, 4 x 10 Gig SFP+, with 580W AC power)
S5710-52C-EI (48 x Ethernet 10/100/1,000 ports, 4 x 10 Gig SFP+, with 2 interface slots, without power module)
S5700-52C-EI (48 x Ethernet 10/100/1,000 ports, with 1 interface slot)
S5700-52C-PWR-EI (48 x Ethernet 10/100/1,000 PoE+ ports, with 1 interface slot)
S5710-52C-PWR-EI-AC (48 x Ethernet 10/100/1,000 PoE+ ports, 4 x 10 Gig SFP+, with 2 interface slots, with 580W AC power supply)
S5710-52C-PWR-EI (48 x Ethernet 10/100/1,000 PoE+ ports, 4 x 10 Gig SFP+, with 2 interface slots, without power module)
8 x Gig SFP interface card (used in S5710-EI series)
8 x Ethernet 10/100/1,000 ports interface card (used in S5710-EI series)
4 x Gig SFP interface card (including 4 x Gig SFP optical interface, extend channel card)(used in S5700-EI series)
2 x 10 GE SFP+ interface card (used in S5710-EI series)
2 x 10 GE SFP+ interface card (used in S5700-SI and S5700-EI series)
4 x 10 GE SFP+ optical interface card (including 4 x 10 GE SFP+ interface, extend channel card)(used in S5700-SI and S5700-EI series)
Ethernet Stack Interface Card (Including stack card, 100 cm stack cable)
Ethernet Stack Interface Card (Including stack card, 300 cm stack cable)
150W AC Power Module
150W DC Power Module
500W AC PoE Power Module
580W AC PoE Power Module
1,150W AC PoE Power Module

Compare and Shop

Vendor Product Description Huawei Advantages
HUAWEI S5700-52C-EI 48 GE RJ45, Dual Slots of Power, Single Slot of Flexible Card, Without Flexible Card
CISCO WS-C3560X-48T-E Standalone 48 10/100/1000 RJ45 Ethernet ports, 2*10G RJ45 / 4*GE/2*10G SFP/SFP+ uplink module, IP Services feature set iStack; two more 10GE uplink ports; large MAC address table (16K vs 12K); high reliability, ring network protocols SEP and G.8032; Eth OAM; 6Kv surge protection
CISCO WS-C3650-48TD-E Stackable 48 10/100/1000 RJ45 Ethernet ports and 2*10G/4*GE SFP+/SFP uplink ports, StackWise-160, IP Services feature set Two more 10GE uplink ports; large FIB table (12K vs 8K); high reliability, ring network protocols SEP and G.8032; 6Kv surge protection; Eth OAM
CISCO WS-C3650-48TQ-E Stackable 48 10/100/1000 RJ45 Ethernet ports and 4*10G/4*GE SFP+/SFP uplink ports, StackWise-160, IP Services feature set Large FIB table (12K vs 8K); high reliability, ring network protocols SEP and G.8032; 6Kv surge protection; Eth OAM
CISCO WS-C3650-48TS-E Stackable 48 10/100/1000 RJ45 Ethernet ports and 4*GE SFP uplink ports, StackWise-160, IP Services feature set Large FIB table (12K vs 8K); high reliability, ring network protocols SEP and G.8032; 6Kv surge protection; Eth OAM
CISCO WS-C3750X-48T-E Stackable 48 10/100/1000 RJ45 Ethernet ports, 2*10G RJ45 / 4*GE/2*10G SFP/SFP+ uplink module, 64G StackWise Plus, IP Services feature set Two more 10GE uplink ports; large FIB table (12K vs 8K); large MAC address table (32K vs 12K); high reliability, ring network protocols SEP and G.8032; Eth OAM; 6Kv surge protection
CISCO WS-C3850-48T-E Stackable 48 10/100/1000 RJ45 Ethernet ports, 4*GE/2*10G/4*10G SFP/SFP+ uplink module, StackWise-480, IP Services feature set High reliability, ring network protocols SEP and G.8032; large FIB table (12K vs 8K); 6Kv surge protection; Eth OAM
HP/H3C S5500-52C-EI HP JD375A 5500-48G EI with 2 Slots. OSPF/BGP Routing GE Switch. 48 10/100/1000Base-T Ports, including 4 GE Combo Ports, and 2 Interface Slots. Interface Slot support 2-port 10GbE XFP Module (JD359B), 2-port 10GbE CX4 Module (JD360B), 1-port 10GbE XFP Module (JD361B), 2-port GbE SFP Module (JD367A), 2-port 10GbE SFP+ Module (JD368B), 2-port 10GBASE-T Module (JG535A). Dual power supply modules; ring network protocols SEP and G.8032; IS-IS; Eth OAM; Easy Operation

Vendor Product Description Huawei Advantages
HUAWEI S5700-52C-PWR-EI 48 GE RJ45, PoE, Dual Slots of Power, Single Slot of Flexible Card, Without Flexible Card
CISCO WS-C3560X-48P-E Standalone 48 10/100/1000 RJ45 Ethernet ports, 2*10G RJ45 / 4*GE/2*10G SFP/SFP+ uplink module, 800w POE+, IP Services feature set iStack; two more 10GE uplink ports; large MAC address table (16K vs 12K); high reliability, ring network protocols SEP and G.8032; Eth OAM; 6Kv surge protection
CISCO WS-C3560X-48PF-E Standalone 24 10/100/1000 RJ45 Ethernet ports, 2*10G RJ45 / 4*GE/2*10G SFP/SFP+ uplink module, 800w UPOE, IP Services feature set iStack; two more 10GE uplink ports; large MAC address table (16K vs 12K); high reliability, ring network protocols SEP and G.8032; Eth OAM; 6Kv surge protection
CISCO WS-C3650-48FD-E Stackable 48 10/100/1000 RJ45 Ethernet ports and 2*10G/4*GE SFP+/SFP uplink ports, 775w POE+, StackWise-160, IP Services feature set Two more 10GE uplink ports; large FIB table (12K vs 8K); high reliability, ring network protocols SEP and G.8032; 6Kv surge protection; Eth OAM
CISCO WS-C3650-48FQ-E Stackable 48 10/100/1000 RJ45 Ethernet ports and 4*10G/4*GE SFP+/SFP uplink ports, 775w POE+, StackWise-160, IP Services feature set Large FIB table (12K vs 8K); high reliability, ring network protocols SEP and G.8032; 6Kv surge protection; Eth OAM
CISCO WS-C3650-48FS-E Stackable 48 10/100/1000 RJ45 Ethernet ports and 4*GE SFP uplink ports, 775w POE+, StackWise-160, IP Services feature set Large FIB table (12K vs 8K); high reliability, ring network protocols SEP and G.8032; 6Kv surge protection; Eth OAM
CISCO WS-C3650-48PD-E Stackable 48 10/100/1000 RJ45 Ethernet ports and 2*10G/4*GE SFP+/SFP uplink ports, 390w POE+, StackWise-160, IP Services feature set Two more 10GE uplink ports; large FIB table (12K vs 8K); high reliability, ring network protocols SEP and G.8032; 6Kv surge protection; Eth OAM
CISCO WS-C3650-48PQ-E Stackable 48 10/100/1000 RJ45 Ethernet ports and 4*10G/4*GE SFP+/SFP uplink ports, 390w POE+, StackWise-160, IP Services feature set Large FIB table (12K vs 8K); high reliability, ring network protocols SEP and G.8032; 6Kv surge protection; Eth OAM
CISCO WS-C3750X-48P-E Stackable 48 10/100/1000 RJ45 Ethernet ports, 2*10G RJ45 / 4*GE/2*10G SFP/SFP+ uplink module, 435w POE+, 64G StackWise Plus, IP Services feature set Two more 10GE uplink ports; large FIB table (12K vs 8K); large MAC address table (32K vs 12K); high reliability, ring network protocols SEP and G.8032; Eth OAM; 6Kv surge protection
CISCO WS-C3750X-48P-E Stackable 48 10/100/1000 RJ45 Ethernet ports, 2*10G RJ45 / 4*GE/2*10G SFP/SFP+ uplink module, 435w POE+, 64G StackWise Plus, IP Services feature set Two more 10GE uplink ports; large FIB table (12K vs 8K); large MAC address table (32K vs 12K); high reliability, ring network protocols SEP and G.8032; Eth OAM; 6Kv surge protection
CISCO WS-C3750X-48PF-E Stackable 48 10/100/1000 RJ45 Ethernet ports, 2*10G RJ45 / 4*GE/2*10G SFP/SFP+ uplink module, 800w POE+, 64G StackWise Plus, IP Services feature set Two more 10GE uplink ports; large FIB table (12K vs 8K); large MAC address table (32K vs 12K); high reliability, ring network protocols SEP and G.8032; Eth OAM; 6Kv surge protection
CISCO WS-C3850-48F-E Stackable 48 10/100/1000 RJ45 Ethernet ports, 4*GE/2*10G/4*10G SFP/SFP+ uplink module, 800w POE+, StackWise-480, IP Services feature set High reliability, ring network protocols SEP and G.8032; large FIB table (12K vs 8K); 6Kv surge protection; Eth OAM
CISCO WS-C3850-48P-E Stackable 48 10/100/1000 RJ45 Ethernet ports, 4*GE/2*10G/4*10G SFP/SFP+ uplink module, 435w POE+, StackWise-480, IP Services feature set High reliability, ring network protocols SEP and G.8032; large FIB table (12K vs 8K); 6Kv surge protection; Eth OAM
HP/H3C S5500-52C-PWR-EI HP JG240A 5500-48G-PoE+ EI with 2 Slots. OSPF/BGP Routing GE Switch. 48 10/100/1000Base-T PoE+ Ports, including 4 GE Combo Ports, and 2 Interface Slots. Interface Slot support 2-port 10GbE XFP Module (JD359B), 2-port 10GbE CX4 Module (JD360B), 1-port 10GbE XFP Module (JD361B), 2-port GbE SFP Module (JD367A), 2-port 10GbE SFP+ Module (JD368B), 2-port 10GBASE-T Module (JG535A). Dual power supply modules; ring network protocols SEP and G.8032; IS-IS; Eth OAM; Easy Operation

Vendor Product Description Huawei Advantages
HUAWEI S5710-28C-EI 20 GE RJ45, 4 GE Combo, 4 10GE SFP+, Dual Slots of Power and Flexible Card, Without Flexible Card
HP/H3C CE3000-34C-EI HP Not Involved Two more 10GE ports (8 vs 6); USB port; ring network protocols SEP and G.8032; Easy Operation
HP/H3C S5500-28SC-HI HP Not Involved Four more 10GE ports (8 vs 4); USB port; MPLS; ring network protocols SEP and G.8032; Easy Operation
HP/H3C S5500-34C-HI HP JG311A 5500-24G-4SFP HI with 2 Slots. MPLS L2/L3 VPN GE Switch. 24 10/100/1000Base-T Ports, 4 1000M SFP Ports, 2 10G SFP+ Ports, and 2 Interface Slots. Interface Slot support 2-port 10GbE XFP Module (JD359B), 2-port 10GbE CX4 Module (JD360B), 1-port 10GbE XFP Module (JD361B), 2-port GbE SFP Module (JD367A), 2-port 10GbE SFP+ Module (JD368B), 8-port Gig-T Module (JG313A), 8-port SFP Module (JG314A), 2-port 10GBASE-T Module (JG535A). Two more 10GE ports (8 vs 6); USB port; ring network protocols SEP and G.8032; Easy Operation
HP/H3C S5800-32C HP JC100A 5800-24G. MPLS L2/L3 VPN GE Switch. 24 10/100/1000Base-T Ports, 4 1G/10G SFP+ Ports, 1 Interface Slot. Interface Slot support 4-port 10GbE SFP+ Module (JC091A), 2-port 10GbE SFP+ Module (JC092B), 16-port Gig-T Module (JC094A), 16-port SFP Module (JC095A), WLAN AC Module for 32-64 Access Points (JD443A). Dual power supply modules; ring network protocols SEP and G.8032; Easy Operation; out-of-band network management interface

Vendor Product Description Huawei Advantages
HUAWEI S5710-28C-PWR-EI-AC 24 Ethernet 10/100/1000 PoE+ ports,4 of which are dual-purpose 10/100/1000 or SFP,4 10 Gig SFP+,with 580W AC power
HP/H3C S5500-34C-PWR-HI HP JG541A 5500-24G-PoE+-4SFP HI with 2 Slots. MPLS L2/L3 VPN GE Switch. 24 10/100/1000Base-T PoE+ Ports, 4 1000M SFP Ports, 2 10G SFP+ Ports, and 2 Interface Slots. Interface Slot support 2-port 10GbE XFP Module (JD359B), 2-port 10GbE CX4 Module (JD360B), 1-port 10GbE XFP Module (JD361B), 2-port GbE SFP Module (JD367A), 2-port 10GbE SFP+ Module (JD368B), 8-port Gig-T Module (JG313A), 8-port SFP Module (JG314A), 2-port 10GBASE-T Module (JG535A). Two more 10GE ports (8 vs 6); USB port; ring network protocols SEP and G.8032; Easy Operation
HP/H3C S5800-32C-PWR HP JC099A 5800-24G-PoE. MPLS L2/L3 VPN GE Switch. 24 10/100/1000Base-T PoE+ Ports, 4 1G/10G SFP+ Ports, 1 Interface Slot. Interface Slot support 4-port 10GbE SFP+ Module (JC091A), 2-port 10GbE SFP+ Module (JC092B), 16-port Gig-T Module (JC094A), 16-port SFP Module (JC095A), WLAN AC Module for 32-64 Access Points (JD443A). Dual power supply modules; ring network protocols SEP and G.8032; Easy Operation; out-of-band network management interface

Vendor Product Description Huawei Advantages
HUAWEI S5710-52C-PWR-EI-AC 48 Ethernet 10/100/1000 PoE+ ports,4 10 Gig SFP+,with 2 interface slots,with 580W AC power supply
HP/H3C S5500-58C-PWR-HI HP JG542A 5500-48G-PoE+-4SFP HI with 2 Slots. MPLS L2/L3 VPN GE Switch. 48 10/100/1000Base-T PoE+ Ports, 4 1000M SFP Ports, 2 10G SFP+ Ports, and 2 Interface Slots. Interface Slot support 2-port 10GbE XFP Module (JD359B), 2-port 10GbE CX4 Module (JD360B), 1-port 10GbE XFP Module (JD361B), 2-port GbE SFP Module (JD367A), 2-port 10GbE SFP+ Module (JD368B), 8-port Gig-T Module (JG313A), 8-port SFP Module (JG314A), 2-port 10GBASE-T Module (JG535A). Two more 10GE ports (8 vs 6); USB port; ring network protocols SEP and G.8032; Easy Operation
HP/H3C S5800-56C-PWR HP JC104A 5800-48G-PoE. MPLS L2/L3 VPN GE Switch. 48 10/100/1000Base-T PoE+ Ports, 4 1G/10G SFP+ Ports, 1 Interface Slot. Interface Slot support 4-port 10GbE SFP+ Module (JC091A), 2-port 10GbE SFP+ Module (JC092B), 16-port Gig-T Module (JC094A), 16-port SFP Module (JC095A), WLAN AC Module for 32-64 Access Points (JD443A). Dual power supply modules; ring network protocols SEP and G.8032; Easy Operation; out-of-band network management interface

Vendor Product Description Huawei Advantages
HUAWEI S5710-52C-EI 48 GE RJ45, 4 10GE SFP+, Dual Slots of Power and Flexible Card, Without Flexible Card
HP/H3C CE3000-58C-EI HP Not Involved Two more 10GE ports (8 vs 6); USB port; ring network protocols SEP and G.8032; Easy Operation
HP/H3C S5500-52SC-HI HP Not Involved Four more 10GE ports (8 vs 4); USB port; MPLS; ring network protocols SEP and G.8032; Easy Operation
HP/H3C S5500-58C-HI HP JG312A 5500-48G-4SFP HI with 2 Slots. MPLS L2/L3 VPN GE Switch. 48 10/100/1000Base-T Ports, 4 1000M SFP Ports, 2 10G SFP+ Ports, and 2 Interface Slots. Interface Slot support 2-port 10GbE XFP Module (JD359B), 2-port 10GbE CX4 Module (JD360B), 1-port 10GbE XFP Module (JD361B), 2-port GbE SFP Module (JD367A), 2-port 10GbE SFP+ Module (JD368B), 8-port Gig-T Module (JG313A), 8-port SFP Module (JG314A), 2-port 10GBASE-T Module (JG535A). Two more 10GE ports (8 vs 6); USB port; ring network protocols SEP and G.8032; Easy Operation
HP/H3C S5800-54S HP JG225A 5800AF-48G. MPLS L2/L3 VPN GE Switch. 48 10/100/1000Base-T Ports, 6 1G/10G SFP+ Ports. Support Front-to-Back or Back-to-Front Cooling. Dual power supply modules; two more 10GE ports (8 vs 6); ring network protocols SEP and G.8032; Easy Operation
HP/H3C S5800-56C HP JC105A 5800-48G. MPLS L2/L3 VPN GE Switch. 48 10/100/1000Base-T Ports, 4 1G/10G SFP+ Ports, 1 Interface Slot. Interface Slot support 4-port 10GbE SFP+ Module (JC091A), 2-port 10GbE SFP+ Module (JC092B), 16-port Gig-T Module (JC094A), 16-port SFP Module (JC095A), WLAN AC Module for 32-64 Access Points (JD443A). Dual power supply modules; ring network protocols SEP and G.8032; Easy Operation; out-of-band network management interface
HP/H3C S5830-52SC HP JC691A 5830AF-48G. OSPF/BGP Routing GE Switch. 48 10/100/1000Base-T Ports, including 2 Combo Ports, and 2 1G/10G SFP+ Ports, and 1 Slot. Interface Slot Support 2 10G SFP+ Ports. 1GB Large Buffer. Large switching capacity (416G vs 360G); high-density 10GE ports (8 vs 4); high reliability, supporting ring network protocols SEP and G.8032